The crown stapler has a motor that doesn’t need to be serviced for a long time to keep the work surface from getting dirty.
In the narrow crown stable, you don’t need any tools to change the depth of drive. There are detents to make sure the staples are set correctly.
Use the rear exhaust to keep the fumes away from work.
Drives 18 GA. staples with a 1/4-inch crown from 1/2-inch to 1-1/2-inch in length with a 1/4-inch crown.
Split noses make it easier to remove staples that get stuck.
Having a belt hook that can be adjusted lets you keep your tool close by.
Carrying case and owner’s manual are part of the kit.
This 18GA 1-1/2-inch Narrow Crown Stapler Kit has a magnesium body that makes it both strong and light. The stapler comes with a non-damaging nose tip that can be removed and a rubber grip that is built into the handle. Whenever the staples need to be replaced, the product has a low staple reload indicator. This helps people know when they need to do this.
So far, things are going well. Today, I shot about 2500 staples, and it didn’t miss a beat at al. Before this, I used an orange stapler from a big box store and a cheap Chinese one that didn’t work well. Because both of those went out of business, I decided to go with this PC. Because it works very well and the depth adjustment is useful to me, which I’m not used to. Even though my tool is empty, it doesn’t stop firing. A feature on my orange tool was useful, so I used it all the tim. As long as the tool works every time, it’s worth it. I think it’s a great idea.
-Update.
Shot about 3000 staples with this tool today, and once again, it worked perfectly. After having to deal with staplers that kept jamming all the time, this one just keeps impressing me!
