Torx range:4-18kgf/cm; work capacity:2-4mm; no-load speed:1200RPM; work capacity:2-4m.
Size of the Chuck:7mm; Screwdriver Diameter:7mm; Length of the Screwdriver:65mm (2.5″.
Exhaust system in the rear.
Suitable for work requiring precision.
Air flow is shut off automatically when the set torque is reached by the adjustable torque control. Turn the knob for pre-setting.
half-automatic air screwdriver and two screwdriver bits are included in the package.
Description.
Exhaust system in the rear.
Suitable for work requiring precision.
Simple one-handed operation with a safety trigger for a quick and safe start up process.
Small volume and light weight combined with high speed and low noise, as well as high concentricity and other characteristics result in an operation that is simple, quick to execute and convenient.
Push-to-start operation is simple.
Construction with ball and needle bearings for maximum durability.
Air flow is shut off automatically when the set torque is reached by the adjustable torque control. Turn the knob for pre-setting.
Quick reversal is accomplished by turning the rotary knob.
Designing for comfort and ease of us.
Specification.
No-load speed is 1200 RPM.
Work Capacity: 2-4 millimeter.
The torque range is 4-18kgf/cm.
Workplace air pressure is 90 PSI.
Air inlet size: 14.
7mm is the size of the chuck.
7mm is the diameter of the screwdriver.
Screwdriver length is 65 millimeters (2.5″.
Diameter:34m.
Length:235mm(9.5″.
4 cfm of air is required.
Hose Diameter: 3/8.
Included in the package are.
1 x Air screwdriver with a half-automatic mod.
2 pieces of screwdriver bits
