We got our Pro team together to give you some tips on how to use an angle grinder from basics to some advanced techniques and shortcuts. Additional Pro Tips on How to Use an Angle GrinderBefore applying the grinder to the work surface, allow the tool to reach full speed. If you’ve got any tips or tricks on how to use an angle grinder, feel free to leave your input in the comments section below!
You can buy very inexpensive angle grinder tool, but for frequent use or for demanding jobs like cutting stucco or cement, I’d recommend spending a little more for a grinder with a more powerful motor. Outfitted with a grinding wheel, an angle grinder is a great tool for restoring edges on rough-and-tumble tools like hoes, shovels and ice scrapers or for the initial grinding of axes, hatchets and lawn mower blades. Finally, with the grinder off, rest the grinding wheel against the blade and adjust the angle of the grinder to match the blade’s bevel.
The secret to successfully using an angle grinder is choosing the right type of cutting disc. Consider how much wood you want to remove and how fast to define the correct cutting disc for your needs. The angle grinder size is determined by the size of the disc, not the length of the tool itself.
We’d like to provide these safety tips with you so that you get the most out of these products while preventing any potential harm that can be caused to you or others by improper use of an angle grinder. “Each angle grinder comes with their own recommended disc sizes. Those guidelines are there for a reason. Imagine you have a 9″ x 1/8″ x 7/8″ Pipeline Cutting and Grinding Disc on a grinder that is built to use an abrasive wheel like a 4-1/2″ x 1/4 x 7/8” Grinding Disc. Unless you have a Metabo angle grinder with a special mechanism to tighten and release your discs, your angle grinder should have come with a special pin wrench.
Firstly, you should be careful in choosing the best angle grinder for the job you need to do, after that, follow this 10-step guide as a rule of thump to use grinder safely. Simply place your angle grinder on the workpiece and let the disc’s rotation cut or grind it for you. Once the preparation step is done, increase the speed of your angle grinder.
proper use of angle grinder Related Question:
What is the correct angle for grinding?
When Surface Grinding and Using Flap Discs For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface.
What 3 things should be protected when using an angle grinder?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work.
How do you use an angle grinder for the first time?
Angle the grinder disc with the cutting edge of the blade or tool you’re working on. Start the grinder and let the disc spin at full speed. Move the disc steadily across the blade, applying only the lightest pressure. Move the grinder from the handle end of the blade and up to the tip of the tool.
Should you wear gloves with angle grinder?
“Gloves should be well-fitted and provide good dexterity and the best possible protection against cut or abrasion and heat,” he said, adding that vibration resistant properties are also of benefit, specially on angle grinders that don’t have Milwaukee’s built in anti-vibration features.
What should you not do with an angle grinder?
Angle Grinder Use Angle grinders generate sparks. When required obtain a hot work permit before use. Keep work area clear of debris and flammable materials. Do NOT use in areas where there is grain dust or other combustible dust accumulation.
Which way should an angle grinder spin?
Every right-angle grinder is marked with a directional arrow on the head of the grinder that indicates the direction the wheel is rotating when in use. For optimal performance, it’s important to orient the cutting wheel so it rotates into and pulls itself into the workpiece rather than rotating away from the workpiece.
Can you use water with an angle grinder?
So, Can You Use Water with an Angle Grinder? Absolutely! But not straight out of the box. With some accessories and a bit of knowledge on how to mitigate the risks, you can use an angle grinder with water to cut tile, brick, or any type of masonry to minimize dust and maximize blade life.
Can angle grinder be used as Sander?
When you need to remove or sand a lot of surface wood away, turning your angle grinder into a sander is the easiest and most cost effective way to do it.
What PPE should I use for a angle grinder?
Angle grinders produce a lot of dust and sparks, which is why you should be fully equipped with protective clothing including tough gloves, protective boots and face protection, consisting of goggles and a dust mask.
What direction should you feed the cutting disc into the workpiece?
The direction of the cutting motion is important. Always feed the cutting disc into the work so that it cuts in an upward direction.
Are angle grinders safe?
Angle grinders can cut through stone, concrete, metal and other hard materials, so they have no trouble cutting through human flesh and bones. Contact with the wheel while in operation can have serious consequences, with deep cuts and even amputations.
Is angle grinder loud?
Hand-held angle grinders can produce noise levels of about 90 to 115 dB(A).
What is a Kevlar glove?
Kevlar gloves are a type of personal protective equipment (PPE) made of Kevlar, a strong synthetic fiber used to protect workers from cuts, abrasions and heat. The gloves are also lightweight, flexible and comfortable.
Should you wear gloves when grinding metal?
Yes you should wear gloves when using an angle grinder. Angle grinders are a dangerous tool, and you should wear gloves, eye protection, and hearing protection when you use them.
What precautions do you take when working with a grinder machine?
GRINDING MACHINE SAFETY Wear goggles for all grinding machine operations. Check grinding wheels for cracks (Ring Test Figure 5-11) before mounting. Do not exceed recommended depth of cut for the grinding wheel or machine. Remove workpiece from grinding wheel before turning machine off.
