Model building, picture framing, dollhouses, birdhouses, and other intricate projects are made possible with this machine.
Fine mechanics, model building, mold construction, toy manufacturing, architects, model carpenters, and fitters are some of the professions that fall under this category.
Wood, nonferrous metals, plastics, Plexiglas, fiber-glass reinforced sheets, foam, and a variety of other materials can be cut with this tool.
Because the load bearing parts and the plane-milled table are made of die-cast aluminum, the construction is extremely stable.
The following items will be delivered: 1x PROXXON Table Saw FET with tungsten tipped saw blade and vacuum cleaner adapter. 37070 is the part number for this item.
Description of the Produc.
Cuts that are perfectly straight. The micro-adjustable, precise, and stable longitudinal stop offers a number of significant advantages, including. Corrections as small as 0.004″ (1/10mm) can be made using an adjusting screw after the coarse adjustment has been completed. When used in conjunction with the angle stop, the height can be adjusted, and the saw blade can be tilted 45 degrees, allowing for the cutting of double mitres. Low-noise drive based on a direct current special motor and a compound belt driver. Shaft of a saw blade with ball bearings. Tungsten tipped saw blade with a diameter of 80mm (3 9/64″), a thickness of 1.6mm (1/16″), and a length of 10mm (13/32″). (36 T). For tight tolerances between the saw blade and the table, an additional work piece pusher and a non-slotted ABS sawing gap cover are provided. Information about the technology. 110 – 120 volts alternating current, 60 hert. 7,000rpm. Mitre that can be adjusted indefinitely up to 45 degrees. Table dimensions: 12″ x 12″ (300 x 300mm). Cutting depth ranges from 0.04 to 5/6″ (1 – 22mm). Saw blades ranging in size from 2 11/32″ (50mm) to 3 11/32″ (85mm) can be used (with a center hole of 13/32″ (10mm). Approximate weight: 12 lb (6kg).
The Manufacturer’s Statemen.
The Proxxon 37070 3-11/32-Inch Table Saw, designed in Germany for perfectly straight cuts, is an excellent choice. Model building, picture framing, doll houses, birdhouses, and other intricate projects such as fine mechanics, mold construction, toy manufacturing, architects, model carpenters, and fitters are all made possible with the X-Acto machine. The Proxxon 37070 has a plethora of features designed specifically for precision craftsmen. For extremely precise cuts, the adjustable setting stop/fence has a setting screw that allows for five adjustments of the longitudinal stop by 0.004-Inches (1/10 millimeter). When making miter cuts, the blade angle can be adjusted from 0 to 45 degrees. It is also possible to raise and lower the blade in order to accommodate the optimal cutting height for the various materials being cut. When a height adjustment and a 45-degree tiltable saw blade are used in conjunction with an angle stop, it is possible to make double miter cuts. Reduced noise drive using a DC special motor and compound belt driver for low-speed operation. The shaft of the saw blade is supported by ball bearings. A saw blade with a tungsten carbide tip is included with the saw. The size 3-9/64-inch diameter x 1/16-inch wide kerf, 24 tooth blade is suitable for general purpose cuts in wood, nonferrous metals, plastics, Plexiglass, fiberglass foam, and other materials, as well as for cutting holes in sheet metal. Die cast aluminum is used for the load bearing parts and the plane milled table, resulting in a stable and durable construction. The use of an extendable table extension with an integrated auxiliary stop allows for extremely accurate cutting of larger materials. The meter gauge is equipped with an aluminum angle stop rail as well as an adjustable limit stop, which allows it to be used to manufacture parts of equal length and angle. Precision accuracy is ensured by the adjustable meter running in a milled slot in the table top. The vacuum cleaner adapter makes it possible to work in a clean environment. Technical Specifications. 7000 RPM at 110-120 Volts AC at 60Hz. The miter can be adjusted indefinitely up to 45 degrees. The table’s dimensions are 12 x 12 inches (300 x 300 millimeters). Cutting depth ranges from 0.04 to 5/16-Inch (1 – 22 millimeter). The arbor for the saw blades is 13/32-Inch or 10 millimeter in diameter.
If it weren’t for the $400 price tag, this product would be a complete joke. What was supposed to be a German-designed and -crafted super accurate machine turned out to be a complete and utter waste of time and resources. The motor housing collides with the bottom of the table bed, preventing the blade from tilting all the way to 45 degrees as intended (the farthest it would go is 42 degrees). If you want to make square boxes, this isn’t the best option. The mite gauge does not slide smoothly because it does not fit properly into the tracking slots. As a result, your work piece will catch and leave uneven edges. However, I don’t want to waste any more of my time with this machine, so I’ll stop there. This product does not meet my standards!!!
