Operator Fatigue is reduced as a result of lower recoil.
Removes the risk of exposure to concrete dust.
Drilling and anchoring are less noisy than powder.
The use of a fuel cell for energ.
From the manufacturer, a leveling foot is used to keep the tool at 90 degrees.
Ramset Powder Fastening Systems are a type of fastening system that uses powder as a fastening medium. It is the most versatile gas technology tool available in the industry, the T3SS T3 Single Shot. Without the need to change power levels or loads, it provides the user with a safe and completely portable way to fasten to concrete, hollow block, pan deck, and steel with a wide range of fasteners without having to move the machine. Make sure that the T3SS is level at all times, and that the removable foot at the bottom is positioned 90 degrees at all times in order to ensure a straight drive with whatever type of faster you are currently using. When fully charged, the fuel cell can provide power for 1000 shots, and the battery pack can provide power for 3000 shots on one charge. The T3SS is equipped with an interchangeable nosepiece that can be switched from standard electrical to magnetic operation. The tool does not necessitate the use of a license and is sufficiently quiet to be used in tenant-occupied buildings. Designed for convenience, the T3SS is a complete fastening system that includes single pin fasteners that have been preassembled with popular clips. Specs: Weight: 7 lbs; height: 15 inches; length: 13 1/2 inches; power: 100 joules; fastener/pin diameter: 0.125 inch.
It does its job, but it blows through the block and the clips don’t hold..I was using 3/4 emt clips with the built-in fastener for this gun, and they kept blowing out the block..I’m not sure how much I like it yet..
