The 2.2KW Air Cooled CNC Spindle Motor ER20 Collet has a voltage of 220V input and a frequency of 400Hz. It has a precision tapered bore of 0.005mm and a speed of 400Hz. 4PC UTE bearings are included.
A variable frequency drive with a runout of less than 0.01mm and speeds of 0-24000rpm, with an AC variable frequency drive with an inverter with a frequency of 0-400Hz.
This spindle is only capable of supporting clockwise rotation; it is not capable of supporting reverse rotation. Please keep in mind that the spindle speed cannot be lower than 9000rpm!!.
2.2KW Inverter VFD 220V with 220V 1 phase input and 220V 3 phase output, high quality spindle with VFD, 220V 1 phase input and 220V 3 phase outpu.
a set of three screws for an 80mm aluminum clamp bracke.
Included in the package are.
Spindle motor with air cooling, 2.2KW, 220V, ER20, high quality.
1 x 2.2KW inverter VFD with a 220V input and an output of 220.
brace made of cast aluminium measuring 80m.
1.spindle motor (also known as a worm drive).
Stainless Steel is the primary material.
Dimensions: 80mm in diamete.
Power: 2.2 kilowatt.
Voltage: 220V/AC (alternating current).
8A is the current value.
400 hertz is the frequency.
24000 revolutions per minut.
Air-conditioning is used for cooling.
Precision tapered bore with a tolerance of less than 0.005m.
Runout off: less than 0.01mm (zero tolerance).
Grease is used for bearing lubrication.
ER20 is the collet size.
The bearings are as follows: 4pcs bearings (C7005x2, C7002x2),UTE bearin.
Wood, aluminum, stone, metal, glass, and PVC industries are the primary applications.
2. Inverter VFD with 2.2kw output at 220.
1) Input voltage: 220V (plus or minus 15 percent).
2) Voltage at the output: 220V (+/-15 percent).
3) Frequency of the input signal: 48-63 H.
4) Frequency range of output: 0-400 H.
5) Input Phase: Phase 1 of the inpu.
6) Output Phase: There are three phases.
7) Warranty is valid for one year from the date of purchase.
3. A bracket made of cast aluminum measuring 80mm in diameter.
80 millimeters in diamete.
Aluminum, with a sandblasted finish on the surfac.
Wood, aluminum, stone, metal, glass, and PVC industries are the primary applications.
Interfacing with the power supply: Professional aviation interface, Interface 1234 marked 123, which is connected to the inverter output end of the (U, V, W), four ground wires, and this interface must be safe ground