CNC 1610 PRO Upgrade Version (CNC 1610 PRO. The frame measures 30x26x25cm. The working area measures 18x10x4.5CM. Aluminum Alloy is used as a material. Motor for the spindle: 775 spindle (12-24V. 24V:10000r/min. Motor: 42 stepper motors, 12V, phase current 1.3 A, phase resistance 2.1 Ohms, torque 0.25 N.m. Stepper motors.
The Mini CNC Router Machine Kit is primarily intended for DIY carving enthusiasts and beginners. It is simple to assemble and operate, and it comes with a paper manual and a USB flash drive containing all of the necessary files and instructions. Please let us know if you require any assistance.
The CNC 1610 PRO machine can not only engrave wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, and other similar materials, but it can also engrave soft metals such as copper, aluminum, and other similar materials. Harder materials, such as glass, hard metal, jade, and other similar materials, cannot be engraved.
GRBL Control Board/SoftwareAfter connecting the control board to a coumpter via the USB port, this machine can be controlled by the Grblcontrol/Candle software. For heat dissipation, the control board is equipped with a fan. It also has additional functions such as spindle PWM speed support, limit switch for tool setting, and steering gear for the spindle.
CNC Offline Controller: This machine can be controlled directly by the offline controller, without the need to connect it to a computer in any way. Support for both SD and TF cards at the same time, with a standard capacity of 1 GB each. After inserting the file into the SD card, the engraving file can be identified without further intervention.
This small CNC mill/router kit was enjoyable to construct and performed admirably for a few applications before failing in the middle of a project. The next time I attempted to use it, the control board began to smoke and eventually caught fire. After putting out the fire, I discovered that the power supply that had been included was a counterfeit LiteOn power supply with misspellings and a poorly reproduced logo on the label, which I immediately reported to the authorities. The quality of the accessories that came with the package was also very poor.
