Spindle Motor ParametersThe 1.5KW air-cooled spindle motor operates at 220V, 400Hz, with less than 0.05mm runout off and speeds ranging from 0 to 24000 RMP. It should be noted that the spindle speed must be maintained at or above 9000 rpm to avoid damage to the spindle.
A dustproof and waterproof cover is included with this spindle motor, as is the body, which is made of stainless steel. A high-quality cooling fan is also included at the rear of the spindle motor. In addition, it contains 4 bearings, high-precision grinding taper holes, high-precision, and low noise, among other features.
Dimensions and characteristics of the 1.5KW variable frequency drive inverter include a five-digit display and a status indicator lamp that show frequency, current and revolution; voltage; counter; temperature; forward or reverse operation; fault; and other parameters. SPWN is the control model. It has the following specifications: input voltage: 220V (+/-15 percent), output voltage: 208VAC-240VAC, input frequency: 48-63 Hz, output frequency: 0-400Hz, input phase: 1 or 3 phase, and output phase: 3.
Multi-Protection Functions of the Variable Frequency Drive Inverter: These include overload protection, fuse broken-motor stops protection, over-voltage / low-voltage protection, frequency track restarted after an instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection, over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, and so on.
Applications on a broad scal.
Generally speaking, the air-cooled spindle motor kit is used for engraving non-metal materials such as wood and bamboo, as well as standard PCBs such as PVC and PMMA, plastic, duotone board (ABS), and so on. Also capable of engraving on soft metal surfaces such as gold, silver, copper, aluminum, and lead, among others.
It is extremely effective.
quite hushe.
With only air, it is possible to maintain a comfortable temperature.
However, one very important consideration is that shielded cable be used; otherwise, EMI will be a problem.
In addition, I believe you must ground yourself (I’m not sure how to do this).
Don’t forget to purchase the ER11 Collet Set as well.
In order to respond to questions about the dimension.
It has been delivered to me, and it measures 65 mm as shown in the photo.
Wishing you the best of luc.
Musaed
