[Purpose]: This adapter set is meant to make your existing tool even more secure. Allows you to get into a lot of places that are hard to get to. The spring ball lock makes sure that the driver head doesn’t slip while it’s being used. It was made to fit into a hand-held driver, drill driver, or impact wrench.
Easy and simple to use: ki. Chrome-Vanadium steel alloy that has been hardened and treated for strength and durability. Stripping doesn’t happen when the drill is going at a high speed. It’s great for at home, in the workshop or warehouse, and so much more. You can use it for hobby, hardware, auto repair, and so much more. Handles the hardest jobs, and the hex shaft saves time when you have to change out of your Power Drill. It also saves time over traditional hand-operated nut drivers.
The angle extension can be used for a wide range of things. Screwdriver Socket Adapter 1/4inch 6mm Hex Drill Bit Screwdriver Socket Holder Adapter, 1/4 inch hex drive shaft is quick change compatible and can be used with most power tools and rechargeable power tools as well as manual tools and drivers. The 1/4 inch hex socket is magnetic, which means that it can hold and use standard drill bits.
Angle Extension: [Material] 105 degrees [angle. For angle drill bits, it is made of Chrome Vanadium steel. It is very hard and will not rust. It has a durable die cast body with three ball bearings for a long life. This right angle drill attachment has a strong magnet that helps it stay in place. It’s easy to use and won’t fall off.
A die cast with three ball bearings holds the angle extension gears in place. In this case, a strong built-in magnetic socket holds standard hex drilling and drive bits, so they don’t fall. 105 degrees is for small spaces and extends the power of a cordless screwdriver. The maximum torque of a 10n/m cordless screwdriver is possible. The right angle head, which is 105 degrees, is made for small spaces and increases the power of a cordless screwdriver. Boosts the power of cordless screwdrivers by 100 in/lbs of torque and 400 RPM.
[Usage.
105 degrees angle extension, which you use when you can’t get to hard places. 360 degree thumb flange that can be turned to the right or left.
It can be used with a hand drill and a manual wrench to connect them to each other.
The function head has a locking and magnetic device, so that the sleeve doesn’t fall off when you use it.
A strong magnet is built in to keep things in place, and it can fit all 1/4 inch screws “To say that these are standard hexagon shank bits.
Apply to all electric drills and socket wrenches that allow you to get into hard-to-reach or small places.
Features.
If you have a cordless screwdriver with a 105° angle, you can extend its power. The maximum torque is 10n/m.
Quick-change: The 1/4 inch hex drive shaft fits most power drill and driver chucks.
Drill Attachment with 1/4-inch Hex Quick Change Drive and Magnetic Bit Socke.
? It can be used with a drill, a rechargeable drill, or a manual wrench.
Connect to a standard hex screwdriver with this adapter.
Die-cast with three ball bearings holds the gears in place, and they are very durable.
Magnetic 1/4 inch hex sockets can hold drill and driver bits.
?What are the main things.
1. Makes sockets that can be used with power drills and drivers work with the tools.
2. A detent ball helps keep sockets in place so they don’t fall off.
During high speed drilling, the 1/4-inch hex shank prevents the drill bit from getting stuck.
4. Heat-treated chrome vanadium steel is very strong and can withstand normal and rough use.
Sandblasting is the fifth and last finish.
All power drills can now be used as quick socket drivers.
With a power tool or a hand screwdriver handle, you can use i.
It’s easy to recognize because it’s colored.
?What’s in the package.
This is 1 x (1/4 * 1/4 * 65mm length) — 1/4 “The socket adapter lets you change the shank into a 6.35mm square head.
It is 1 x (3/8 x 1/4 x 65mm) “The socket adapter lets you change the shank into a 9mm square head.
1/2 * 1/4 * 72mm length = 1/4 “The socket adapter lets you change the shank into a 13mm square head.
Drill: 1 x 105° Right Angle Drill
