5 different spindle speeds ranging from 620 to 3100 RPM. Drilling into any type of material is possible at a variety of speeds.
Construction is made entirely of steel and cast iron. Vibration-free operation is ensured by the rugged heavy-duty construction.
Stopping at a certain dept. Set your drill depth quickly and accurately; this is especially useful for repeatable drilling.
Excellent for drilling holes in pen blanks. Construction is entirely of cast iron and steel, and features solid cast-iron handles, a depth stop with scale, a toggle switch, and a speed selection chart.
The fact that it is so light was the primary reason I purchased it. I’m a disabled senior citizen who is unable to lift heavy objects and who does not have the space to permanently install a drill press, so this was the perfect solution for me.
This is a bare-bones version of the model. When the lock is released, the table can move freely up and down the column because there is no rack and pinion to adjust the height of the table’s height. There is no work light available. Because the motor is only 1/3 horsepower, the size of drill bits, hole saws, and other tools that can be used are limited. The base is narrow and can be a little wobbly if it is not secured to a bench. The pulleys used for speed reduction are made of reinforced plastic. Still, it’s not a bad deal when you consider the price.
So that I wouldn’t have to lug around two power cords, I installed a 120v gooseneck LED work light and wired the power cord into the switch box on the drill press (the light has its own power switch). In addition, I bolted the drill press’s base to an oak board so that I could place rubber feet under the board to protect any work surfaces that I might put the drill press on in the future. This also contributes to the stability of the drill press.
This machine is intended for light duty applications. The 1/3 HP motor has limitations in terms of the size of the bit and the hardness of the material that can be worked with. I made use of a 1 the other day “The use of a hole saw to cut a hole in a piece of 6061 T6 aluminum is demonstrated. I had to reduce the speed to 1100rpm and use a light feed in order to keep the motor from stalling out. Bits that are large (3/8”) “When breaking through on aluminum, a very light feed is required to avoid snagging the motor and causing it to stall. Despite these limitations, it is still capable of performing its functions so long as the user does not attempt to ride it around.
Despite its limitations, I (as well as my aging back) have been extremely satisfied with this device. It sits on top of my washing machine, which I find convenient. The increased height allows me to see what I’m doing more clearly without straining my back.
