[MORE POWER. This small circular saw has all the features of a full-size circular saw but in a smaller, easier-to-use package. It also makes it easier to make quick cuts.
In order to have a more even feel. As long as the motor is in the handle, you can move the saw with just your palm. This makes the saw move more smoothly.
Ease of Setting Dept. Adjustment levers are easy to reach, so you can change the cut on the fly. The bevel adjustment lever lets you make cuts from 0° to 45°.
For quick and safe blade changes. Grab the included blade key and switch out any brand’s 4-1/2″ blade with the one that comes with it.
Improved visibility of the blad. Left-handed blade housing lets you see where you are cutting, so you can make straighter, more precise cuts with this tool.
When the saw is in use, you can hook up a dust-vac and pull debris right from the air, making it easier to see what you’re doing as well as making the air cleaner.
With the 4-1/2″ Compact Circular Saw from Rockwell, you don’t have to deal with the hassles of a traditional circular saw. Grab it and go when you need to make quick rips or plunge cuts. You don’t have to bring out the big full-size saw. Even though it can do a lot of different things, this saw was made for 2″ lumber, cutting 2x4s in one pass. You can better control the tool because it weighs only 5 pounds, which makes it easier to use with one hand. It also makes cutting from above a lot easier than with a full-size saw, which isn’t always possible. The grip is easy to hold for a long time. The 5-amp motor can spin the blade at 3,500 rpm, which is the same speed as much bigger saws, but with less strain on the motor. This means that the tool will last longer and use less energy. Allows for a maximum cutting depth of 1-11/16″ at 90°. The lever is easy to reach. Using the bevel lever, you can make the most common angle cuts from 0-45°. On those cuts, you can go as deep as 1-1/8″ on those cuts. Again, this saw is great at cutting 2x4s, but it’s also great at cutting plywood, hardwood flooring, pegboard, dowels, molding, and more. It comes with a 24T TCT blade, a parallel guide, a vacuum adapter, and a blade key, so you can change the blade.
It broke right away the first time I used it. It was the bolt that holds the blade. I saw the same thing and picture on Amazon.com, but I thought it wouldn’t be my story.
