What the Ringinator® does is take these long coils and using a precision jewelers saw, cuts them right down the center to create individual jump rings with perfectly flush cut ends. I got everything setup and it is cutting the stainless steel like my flexshaft cuts silver. I have cut over 10lbs of 16ga stainless steel rings and I am still on the first blade!Thanks,Stephen.
AWG / SWG. AWG stands for American wire gauge, while SWG stands for standard wire gauge – both are wire measurements that use a numerical system to indicate the thickness of wire, however they are not equivalent to one another. 3/4 hard wire will retain shape and work harden very well. Work-hardening occurs naturally when forming or shaping wire and metal items, and will also occur through other procedures such as tumbling or hammering.
saw cut vs machine cut rings Related Question:
What gauge is jump rings?
For jump rings, the most common gauge is from 18 to 22 gauge. 22 gauge is already very thin and easy to deform, and easy to be pulled to open if you don’t solder it. If you just want to have jump rings that you can close with a pair of pliers and stay secure, choose a size from 18 gauge to 21 gauge.
How do you measure jump rings?
Jump rings range from tiny to huge and are measured by diameter. There is an outside diameter (OD) and an inside diameter (ID). Sometimes, certain chainmaille will require a particular diameter or combination of diameters (like in helm chain or dragonscale) to ensure all the interlocking pieces fit as they should.
Can you glue jump rings closed?
Once the jumpring is closed, adding a drop of instant glue to the seam provides additional security. The only way to permanently secure jumprings is to solder them together. Some jumprings are already soldered closed; others are solder filled and can be soldered closed with the use of a butane torch.
What is the best wire for jump rings?
18 gauge jewelry wire is used for making sturdy clasps, jump rings and other findings. Solid (not plated or filled) 18-gauge wire can be used to make rivets.
What is the difference between a split ring and a jump ring?
Jump rings are most commonly defined as a circle of wire that meets at the end and is not welded together. A split ring consists of two complete turns of a helix and pressed flat together where objects can be strung on them. This makes each ring be associated with a different type of security level.
Can a jewelers saw cut wood?
Jewelry-making starts with the right tools and no jeweler’s bench is complete without a jeweler’s saw. As one of the most important and fundamental jewelry-making tools, jeweler’s saws make the finest cuts in any material including soft metals, wood, fiberglass, Styrofoam and plastic.
What is 18 gauge in a jump ring?
Jump rings are typically measured by their Inner Diameter, Outer diameter, and wire gauge. For example, if you made your own jump rings from 18-gauge wire around a 5mm dowel, the Inner Diameter is 5mm, the gauge is 18-gauge (or 1.02mm, found in the Wire Conversion Chart).
What is the thinnest jump ring size?
The smallest jump ring you may ever see. The perfect size for joining delicate items as subtly as possible. Components to chains to clasps, small pendants to earrings, etc. Measurements: 2.5mm outside diameter.
Should I solder my jump rings?
Ideally, all jump rings should be soldered shut to prevent components in your designs from unhooking from each other. In practice, it can be time consuming and expensive to close every jump ring in your creations, but if you select the right size and thickness of open jump ring, it may not be necessary.