SDS Max Chisel Set in Three Piece.
This product is excellent for tile and thinset removal.
Edge that has been machine sharpene.
Steel with a high degree of impact hardenin.
Shank for SDS MAX (NOT COMPATIBLE WITH SDS PLUS.
The chisel shanks are SDS MAX compatible, and your rotary hammer must also be SDS MAX compatible in order for this to work. DISCLAIMER: SDS MAX and SDS PLUS are not interchangeable!!. ****. New 3 piece THINSET REMOVAL BIT, as well as tile and scaling tool. A chisel set is sufficient for the majority of medium-sized flooring projects. The set includes a 1-inch wide (16-inch-long) Self Sharpening Chisel that DEMOLISHES even the most difficult tile, slate, and wood flooring. The chisel is self-sharpening. The 2-inch-wide (16-inch-long) Chisel is excellent for cutting through tough tile and stubborn thinset. With a 3-inch wide by 12-inch length chisel, you can easily remove most tile and thinset from the surface of your work. Purchase in bulk and save money. Drop forged steel alloy that is specifically designed to withstand high impact stresses. Compatible with all SDS Max rotary hammers that are in common use. This set will take care of you job after job until you are completely satisfied. WARRANTY. We will refund your order if you are not completely satisfied with the product.
In order to remove 800 square feet of Mexican tile, I had an SDS MAX (6.1 ft-lbs) and an SDS Plus (2.2 ft-lbs) at my disposal. I experimented with a variety of bit and tool combinations in order to find the most effective one. The 2″ chisel from this collection, combined with an SDS Max hammer drill, proved to be the most effective for removing the tile. After that, I used a 4″ thinset removal bit in conjunction with an SDS plus hammer drill to scrape away any remaining thinset. When it came to removing thinset, I discovered that the smaller SDS plus bit performed significantly better than the larger 6″ SDS Max bit. I believe this is due to the fact that the SDS plus, despite having lower energy, has twice the frequency of the SDS (5,800 bpm versus 2,900 bmp for the SDS max). The higher frequency appears to be more effective at removing the thinset. I was able to complete the removal of 800 square feet of tile and thinset in approximately 13 hours using this combination (approximately 60 square feet per hour).
