The mini metal lathe has a 550w brushed motor, 110V 60hz, and runs on 110V and 60hz. It has high-quality iron construction with robbert feet to keep it stable and strong when it turns, drills, threads and cuts. Moving on two rails is smooth and durable. To make nylon gears, you need to think about how to make the.
MT4 Spindle speed ranges from 0 to 2500RPM, with two speed levels that can be used for different metal workings. 0-1250RPM, 100-2250RPM. The small lathe machine with a soft start button has a forward and backward design.
With a power metal lathe, there is a Large Center Distance of 13.78″/350mm and a Swing Over Bed of 7.09″/180mm. K11-10. In a 3-jaw chuck, there are three internal jaws. It can turn at a max speed of 3500RPM. It comes with three extra jaws. A cover and long splashguard keep things clean while you work.
The 4-way tool rest makes it easy to fix, change, and adjust cutting tools in different directions. Turn the blade adjusters with accurate scales clockwise or anticlockwise to move the tool post forward or backward. Turn the switch on the horizonal blade to the left and turn the handle. Then the Cross Slide can move around freely again.
In this case, if you loosen the handle that holds it down, then you can move the tailstock in any direction. If you turn the tailstock handwheel, you can move MT2 dead center to where you want it. Wrenches can be used to change the position of two holes on the up face and the side face. They can be used to set the handle and the dead center for each one.
★Description.
With our metal lathe machine, you can swing over the bed: 7″ (180 mm), the cross slide: 14″ (350 mm), and the three-jaw chuck: 100mm. With a 550w motor, an MT4 spindle taper, an MT2 tailstock taper, and a 4-way tool rest, the benchtop milling machine can do a lot of different things, like turn, drill, thread, and cut things.
It has a lot of great features, like being small.
550W motor, 110V 60Hz. Powerful and durable. High-quality iron with robbert feet is used to build this. Two high-quality rails were used.
A spindle speed range of 0-2500RPM is available. Low 0-1250RPM and High 100-2250RPM can be chosen. The soft start button has a forward and backward design.
It has a lot of space, with a center distance of 13.78″/350mm and a swing over bed of 7.09″/180mm. Accurate scales make sure that things are done correctly.
Professional Tool Rest: The tool rest can be easily moved. It takes 2.56″/65mm for the Cross Slide to swing over the Cross Slide.
When you loosen the fix handle, you can move the tailstock forward and backward; if you loosen the quill lock, you can move MT2 dead center.
A lot of people use this machine for sample processing, small precision parts processing, and modeling.
★Specifications.
The motor is 550W.
To the center: 14 “In this case, /350mm.
7 “In this case, /180m.
It’s 3.15 “It’s about 80mm.
This is how far the cross slide can go: 2.56 “It is /65m.
Versatile speed: 0 to 2500 RPM.
Chuck Size: 4″/100mm 3 Ja.
Bore: 0.8 “In this case, /21 mm.
The range of long-term feeds: 0.4-2m.
Threads: 12-5.
T.P..
The Spindle Taper is MT4.
In the tailstock, the taper is MT2.
Gear made of nylon: Gear made of nylo.
G.W.: 108.03 pounds/49k.
What’s in the package.
One small metal lath.
Some Other Accessorie.
There is only one manual here.
So after looking at a lot of different types of lathes and dismantling my own for inspection and tuning, I would say I got a very good example of this type of lathe, which is what I was looking for. I think it’s a good idea to rebuild any of these small lathes, no matter what the “brand” is. The tail stock I got on my machine is garbage, but as I said, the rest of the machine is better than I thought. Because the shipping weight said 15.5lbs on ups, I was a little worried that I was getting the wrong thing. However, I did get the lathe I ordered. No, this model does not have a high or low lever, as the listing said.
