Buy RH170202 SKIL 20V SDS-plus Rotary Hammer with 2.0Ah Pwrcore 20 Lithium Battery and Charger

When you buy this set, it includes everything you need to get started, like a battery and charger for the drill.

Powerful design hammers through the hardest materials, like concrete and masonry, with ease.

The PWR core 20 Lithium battery has an innovative temperature management system that helps keep the battery cool and keep it working through your project. This means that the battery will last longer.

Quick, tool-free bit changes: Sds Plus chuck.

Three tools in one: The hammer drill, drill, and screwdriver are all in one tool, which saves time and increases efficiency.

It has variable speed control, which means you can start it at the exact speed needed for the job.

As you move forward or backward, these signs show you where you’re going. With an LED indicator, you can quickly figure out which way you’re going to drive.

When the trigger is pressed, the LED lights up the work area. The light stays on for 10 seconds after the trigger is released.

Having three tools in one. You can use the SKIL 20V Rotary Hammer to be a hammer drill, a drill, and a screwdriver all at the same time. It is very easy to use. To quickly break through hard materials like brick and stucco, this tool has a powerful and efficient hammering function that is very good at what it doe. A hammer drill that can be used to cut through concrete is also one of the best ones. A PWRCore 20TM 2.0Ah Lithium Battery and a 20V Charger come with the package.

As far as I can tell, the build quality is good for the low price that it comes at (3 generous stars). However, this is one of the least powerful 18v/20v sds-plus rotary hammers on the market. It could be good for light-duty work. Manufacturers say the rotary hammer can cut 7/16″ into concrete, which is the smallest number I’ve seen for an 18v/20v system. It has a very low rated impact force, too (.7 ft.lb.). The rotary hammer also doesn’t have a “hammer only” mode like most other hammers do, but this isn’t the case with this one. However, it does accept hex bits and sds-plus. A different brand costs $40 more than the one I already had, but I wanted more power, the ability to use it as a chisel in hammer-only mode, and the ability to use it as a chisel in hammer-only mode. So, even though it costs less, I think it’s better to spend a little more for a more powerful tool.

Leave a Reply

Your email address will not be published. Required fields are marked *