Fresh off our best 12-inch miter saw reviews article, we wanted to get our readers a more comprehensive guide to the best miter sawsperiod. Considering the Bosch 12-inch Axial Glide Miter Saw is already our #1 pick, it also wins as our best 12-inch miter saw for the reasons we already mentioned. We dub the Metabo HPT C12RSH2 the best miter saw for the money and also our best budget miter saw for Pros.
The trade-offs: limited cutting depth and miter range, and lame angle markings, on a printed sticker. We liked the cool design but never got used to its odd, twisting miter lock or the need to push harder as the blade neared the end of a cut. TOH Tip: “Here’s an easy way to fine-tune your cuts: Lower the blade-don’t start it-and push your work against its side, deflecting it slightly. Now raise the blade and make the cut. Only a thin sliver will come off.” -Norm Abram.
First up are the basic miter saws commonly used for trim cutting and cross and miter cuts. Compound miter saws are most effective at cutting crown moldings and the like, performing even more complex jobs with ease and accuracy. The best compound miter saws can even cut in various angles, even without stopping the motor.
So grab a fresh cup of coffee, close all of your other miter saw review tabs, and get ready to take a deep dive into the best sliding compound miter saws of 2021. The DeWalt DWS780 is a superb option for those looking purchase their very first miter saw, and is very-much the ideal saw to consider if you’re contemplating upgrading to a sliding compound miter saw. The DeWalt DWS780 is dual bevel sliding compound miter saw, meaning the blade on this miter saw tilts in both angle directions, allowing you to make precise cuts without needing to calibrate or adjust anything.
sliding circular saw reviews Related Question:
Are sliding miter saws less accurate?
Chop-cutting accuracy at 90° was on par with other saws at 1/256 inch in 4 inches and slide accuracy was good at 1/128 inch in 12 inches. While the 90° straight cuts were good, slide miter cuts were only fair. The blade shows some measurable and visible wobble and the head has some deflection.
Is Sliding Mitre saw worth it?
A sliding miter saw is perfect for longer pieces of wood you’d be working with, thanks to the blade that can travel in a sliding motion. Not only longer pieces of wood are perfect for cutting with a sliding miter saw, but also thicker pieces of lumber you may be using.
What are sliding saws used for?
A sliding miter saw is a type of miter saw that adds rails to let the saw blade slide front to back across the wood. It gives you a much greater depth of cut than the same size miter saw without rails. Most sliding miter saws also include the ability to make a compound cut.
What is the difference between a sliding miter saw and a compound miter saw?
The sliding miter saw features rails that allow the blade to move forward and backward. This means that the sliding miter saw can handle much wider materials than your basic miter saw or compound miter saw.
What size wood can a 10-inch sliding miter saw cut?
Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. Saws also differ by whether the blade arm simply rotates (a basic miter saw) or both swings and slides (a sliding miter saw).
Can you cut a 4×4 with a 10-inch sliding miter saw?
If you really want to cut 4x4s reliably, and if you foresee many future projects involving 4x4s, then you’re asking the wrong question. It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw.
How long can a sliding miter saw cut?
What is a Sliding Compound-Miter Saw? Sliding compound-miter saws will work just like chop saws, but because their blades move back and forth on horizontal rails, they also can slice stock up to 15 inches wide in one stroke.
Do I need a miter saw if I have a table saw?
Cutting Angles A table saw will suffice if you just need a saw for general cutting purposes. However, you will need a miter saw if you expect to cut precise angles that rely on accuracy and precision.
How much does a miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
What is the difference between sliding and non sliding miter saw?
Non-sliding miter saws can’t handle broad cuts, and they aren’t quite as efficient at cutting wood as sliding miter saws are. While sliding cuts usually glide through the wood from front to back, non-sliding miter saws cut through from top to bottom.
What is the main advantage of a sliding compound miter saw?
They can quickly create bevels at any angle. Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.
Is a 7 1 4 miter saw worth it?
Let me help you then; if you’re someone who needs to work with wider or relatively larger boards often and often, it’s better to choose the 7 ¼ miter saw. But if you need to make bevel cuts every once in a while, then a 10-inch miter saw should be your go-to!
Will a 12 sliding miter saw cut a 6X6?
The 12-inch miter saw will be able to cut through a 6X6 piece of lumber however not on a single go. These are great saws for 2X6 cuts.
How thick of a board can a 10 sliding miter saw?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
Can a 7 1 4 circular saw cut a 4X4?
Standard circular saws with 7 ¼” blades can only cut 2 ½” deep, so making the cut in a single pass isn’t possible. That means you’ll need to make multiple passes to cut clean through the 4×4, and this can result in a poor finish unless you take steps to ensure your cuts line up perfectly with each other.
