Active Dust Collection – This professional cabinet saw is equipped with a dust collection port system. It has the ability to capture up to 98 percent of the dust generated by your table saws. The dust chute will keep dust in one place, allowing you to easily maintain a dust-free environment in your surroundings.
Cutting with Efficient – With a rip capacity of 20 1/2 inches and a depth of cut of 2-3/8 inches, this compact tabletop saw can easily zip through most jobs, even large pieces of wood, and ensures a comfortable and smooth cut every time.
Powerful Cutting Performance – Powered by a powerful 15-amp engine, this table saw will produce 5000 RPM cutting power, allowing it to cut through a variety of wood fibers, fiberboard, plywood, block board, and plasterboard with relative ease.
Onboard storage is provided by the machine, which has compartments built in. ensures easy access to the blade guard assembly, fence, riving knife, miter gauge, wrenches, and push stick, among other thing. Increase both the productivity and the efficiency of your employees.
Solid Construction – The metal roll cage base ensures a stable setup, increases the durability and strength of the rear feet, as well as protecting the saw from any accidental drops or impacts that may occur.
A Sirocco saw that has been rebranded, that’s what this appears to be. It doesn’t really matter.
It was delivered with 99 percent of the parts assembled. I connected the dust hose and secured the knobs, guard, and dust vac in their respective positions. I’m ready to take off. It took about 5 minutes from start to finish to complete the project.
Things I like: I appreciate how simple it is to use and set up. The process of cutting flooring and quarter round is virtually dustless. Really. This is a no-brainer in my opinion. It’s lightweight and portable. I can easily move it from one room to another.
Making adjustments is a simple process. For 99 percent of the jobs, the measurements are accurate enough to be used. To dial in the 1 percent, use an angle gauge to measure the angle.
Things that I made better. I labeled the rear rail with the corresponding measurements from the front rail. The guard does not slide smoothly, and it must be measured to ensure that it is parallel to the floor. If the front and back are not measured, the front and back can be off by a few millimeters. This is extremely inconvenient, but it is also extremely simple to correct. It would have been nice if the extension was on a rack and pinion.
One thing I didn’t care for was the fact that the plug was not grounded and that the machine was not grounded. Bizarre.
The dust bag is simple to empty and can hold a substantial amount of dust before needing to be cleaned.
In general, I’m pleased with it.
