Buy Spritech PCP Air Compressor, Portable 4500Psi/30Mpa, Water/Oil-Free, PCP Rifle/Pistol and Paintball Tank Air Pump, 12V Car DC or Home 110V AC with Power Converter and Oil-Moisture Filter

New Portable Car or Home PCP Air Gun Compressor. A burst disc is added for safety, heat dissipation is made better for reliability, and a 12V power cable socket is made for easy wiring. 12V from a car battery or 110V AC with a power converter can be used to run the air compressor, but you need a power converter to do this (included). Air gun: It can be used in the field or at home at any time. There is a maximum inflation pressure of 30M Pa (4500PSI). Air cylinders should not have more than 1L of space inside (60ci).

Water/Oil-Free and Oil-Moisture-Free Filter. There is no need to circulate cooling water outside or add oil. High-power fans are instead built in to get rid of heat. And the shell has a lot of vents that can cool the compressor in a lot of different ways. All of these things are to make sure that this PCP air pump can keep running for a long time. At one end of the hose, there is a filter that traps oil and water. It can effectively keep oil and water from rusting your airguns or air tanks.

Fast Disconnecting Fitting and Powerful Air Compressor: Both ends of the hose have female 8mm FOSTER connectors, which can be used with most PCP air rifles and paintball tanks. In this air compressor, the power at which it can run is 350 watts at full power. From 200BARS to 300BARS in a 500CC tank takes about 8 minutes, and from 0BARS to 300BARS in 20 minutes. In this pump, it does its job for 25 minutes and then takes a break for 10 minutes. Keep your air gun from being too charged.

Connecting the power converter is easy and more secure now that it has been set to 110v. Inserting is all that’s left to do. There is a quick-connect fitting that makes it easy to connect the air compressor to the air gun. This compressor has a burst disc, a hose that can withstand 60Mpa, and a temperature display that lets you know when the temperature inside is getting too hot. It’s time to stop filling and start the compressor again after it’s cooled down.

The net weight is just 5.0 kg. And the top side is only a little bigger than your palm when it’s open. One hand can hold it up and it is very easy to carry and store. However, its pump power is very strong. Airgun games can be played at home or in the field with this compressor, so you can enjoy them to the fullest. One year after you buy one of our compressors, you don’t have to worry about them breaking down. Our goal is to always give our customers high-quality products and services.

The media couldn’t be loaded because it was too big to move.

When I opened the box, water was coming out. In this picture, the aluminum block has holes cut out for the outlet, needle valve, and burst disc, so they can be used. A piece of aluminum got stuck on the seal ring. Make sure that you clean the outlet, needle valve, and burst disc before you do anything else. Do your own final assembly check. My friends, be careful and don’t become lazy. 4500 psi of pressure is what we’re dealing with. You need to check that out for yourself. This is not a toy that your mom bought you. I know that your mom doesn’t want to see half of your face blown off by this. I don’t care how ugly you are. Hahaha. Send some down range for me. 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *