Dry Diamond Polishing Pads with a Diameter of 4″ for Professional Us. 6 Pcs. set for polishing Granite/Marble/Concrete/Stone, 1 piece X Grit (50/150/500/ 1500/ 3000), and 5/8″ 11 threaded 4″ rubber backe.
high and flexible with a velcro backing of 1.2 m.
It is effective on granite, concrete, marble, and other stones, among other things.
Optimal RPM is 1800, and the maximum RPM is 3000.
The optimal RPM is 1800, and the maximum RPM is 3000. It is compatible with variable speed grinders and polishers.
4″ Diamond polishing pad of high quality and durability (STADEA Super A. 5-piece set with one backer (one each of Grit 50, 150, 500, 1500, and 3000 plus one 5/8″ 11 threaded rubber backer) for polishing granite and marble surfaces (as well as concrete and stone), as well as granite tile and glass (as well as other surfaces). These diamond polishing pads are aggressive and can be used on any type of natural or artificial stone, including granite, marble, concrete, terrazzo, travertine, and glass, among other materials. As a result of its flexibility, it can polish either a contoured surface such as an Ogee or a flat surface such as a Full Bullnose, Half Bullnose, Bevel, or Demi. Dry polishing pads can be used on low-speed grinders as well as variable-speed grinders and polishers for a professional finish. Dry diamond polishing is an excellent choice for polishing needs on-site or after an installation. Typically, wet polishing results in a watery mess, and it may be difficult to perform wet polishing on-site or after the installation is complete. Dry polishing is a simple and effective method of polishing stone that does not involve any water. Because it generates dust, it is necessary to wear protective masks while dry polishing. In general, polishing begins with a grit 50 diamond polishing pad and consumes more diamond polishing pads than higher grit diamond polishing pads as the process progresses. FAQ. Using STADEA Super A dry polishing pads for wet polishing is a possibility, according to the manufacturer. Yes, that is correct. STADEA Super A dry polishing pads are specifically designed for dry polishing in order to dissipate heat more quickly and maintain a low temperature on the polishing surface. It can also be used for wet polishing in the same way. 2) Which backer threaded (5/8″ 11 thread or M14 thread) is the most appropriate for my application. Ans: In countries that use the English system of measurement (e.g., the United States, Canada, etc.), the 5/8″ 11 thread is standard. M14 thread is standard in countries that use the metric system of measurement (for example, Australia, China, and other countries). You can also look at the polisher’s specifications to see what size arbor thread it has.
I had previously ordered this product and was under the impression that I was ordering the exact same product as before. These are NOT the same items as the ones I previously ordered. These do not work and are of poor quality. When I use my old, used pads, I can get a better polish. I’m not sure why this is happening. Perhaps they were made in different countries. The only difference is that I had previously ordered from Shop ‘n Save diamond tools (via Amazon) and this time I ordered directly from Amazon instead. It is the same material as the Amazon, but the felt side of the Amazon has a different texture. Additionally, the supposed diamond side does not exist and does not polish. There is something wrong with them, and I’m not sure what it is. They are trash, and they cannot be used. Yes, I squandered money, but what’s more disappointing is that I was unable to use these and had to place an order for something else.
