Four-inch-long hook and loop backing pad made with premium-grade hook and loop for a non-slip, stronger bond with the attachment device.
Body is made of heavy-duty aluminum that will not flex under pressure, making it ideal for flat-surface wet or dry polishing.
Arbor made of durable brass with a 5/8″ diameter “A must-have for wet polishing is an 11-thread and center water hole.
4 mm is the diameter “or 100 millimeter.
5000 revolutions per minute is the maximum speed.
(It’s not round, and it’s worse than the one it replaced. This is not correct. The Stadea has a 5/8-inch mount that is higher than the other, which compounded my error. It’s just threaded onto my Roxx machine without the need for the metal collar part to be attached. This is a piece of the two-piece connectors for non-threaded attachments, which are tightened with a spanner wrench (not included). As soon as you thread the backer on without the bottom piece, the backer tightens to thread pitch, resulting in the piece not being flat. If your polisher is designed for non-threaded attachments that require the use of a spanner nut and bottom washer, it is likely that it lacks a flat surface to tighten on. Yes, you are stupid. However, if this happens to you, I hope you will read this. peace
