Buy 5

Stadea Series Super C, a diamond polishing pad for dry polishing concrete, terrazzo, and marble. It is made for this. Grit 50: 5″ Dry Diamond Polishing Pad: 1 Piec.

Professional-grade 5″ Dry Diamond Polishing Pad for concrete, marble, terrazzo, travertine, soft stone, and glass. It’s for dry polishing.

It’s Velcro-backed and flexible, so it’s great for floor edges, floor polishing, and countertop polishing. The max RPM is 3000.

Durable pads that are 2.5 inches thick will last longer, be more efficient, and have a high-gloss finish that looks like it was done by a pro.

Worked very well on the edges of hard stones too. Granite and quartz are two types of stones.

5″ dry diamond polishing pad with Grit 50 – 1 piece for Concrete, Travertine, Terrazzo, and Marble floor and floor edge polishing and concrete countertop polishing.

It’s for concrete, terrazzo, marble, and travertine that are dry polished.

Series Super C dry pads are made for polishing concrete, travertine, terrazzo, and marble floors and countertops. They’re made to get the best performance and shine. This pad is good for concrete, travertine, terrazzo, and marble, which are all soft stones. It gives these materials a high gloss shine and a faster polishing speed.

It can also be used to polish the edges of more hard stones like Granite and Quartz on your countertop.

Pads that are durable and thicke.

The polishing pads are 2.5 mm thick and can be used in many different ways. It lasts more than twice as long as the typical 1.2 mm dry pads that most people use. This set of professional polishing pads is a great deal for what you pay for them.

Versatile, Available in a Variety of Size.

You can choose from the following sizes and grits of dry pads for your project.

4 inches, 5 inches, 6 inches, 7 inches.

Grit 30, 50, 100, 200, 400, 800, 1500, and 3000 are some of the grits that can be used.

The picture shows seven pads. “Pads” is what the ad says (plural). Only one pad is mentioned at the bottom of the ad.

Leave a Reply

Your email address will not be published. Required fields are marked *