Kit includes: wet polisher, 4″ diamond polishing pads set, 4″ rigid rubber hook loop velcro backing pad, and 4″ rigid rubber hook loop velcro backing pad from Stadea Stone Concrete Countertop Grinder Polishers. The 5″ Stone Wet Polisher with DTM+ motor gear system has the following characteristics. enhanced power and optimal speed are required for wet or dry polishing of stone concrete; an. The speed of either stone polishing process can be controlled with a variable dial. RPMs range from 700 to 3000 depending on the application.
The Stadea Series Standard is included in the kit. A wet set of seven 4″ diamond pads for surface polishing concrete marble and stone granite, as well as edge polishing granite. Additionally, a 4″ rigid rubber backing pad with a 5/8″ 11 thread is included. Seven diamond polishing pads are included, one for each of the following grits: 50, 100, 200, 400, 800, 1500, and 3000.
Its ergonomic grip-size and long, out-of-core, soft back handle design transfers minimal polisher weight to the back handle, thereby reducing back hand fatigue. This, combined with the innovative head heavy polisher design, transfers machine weight to the stone concrete polishing surface, thereby increasing polishing pressure naturally and assisting in enhanced polishing performance, while also reducing back hand fatigue. The out-of-body back handle eliminates hand blockage in the air vent, resulting in increased motor performance and durability.
A built-in water quick-connect that connects to a standard water hose is included. Controlling the water pressure, using a water stopper, etc. Extra-long water line, water flow line under the polisher that does not interfere with polisher handling while in use, three-hole 120 degree water hole for even water distributio.
For easy removal of tool accessories, arbor locks are used. Soft-start, one-push power start & lock switch for the polisher for ease of use, splash guard with vacuum connector for water and dust control, and a reversible blade for versatility. Dual handle for a variety of applications. For stone polishing, a top D-handle is a must, as is an ambidextrous side handle for easy multi-purpose use, and an ergonomic backhandle. Class-A GFCIs are designed to provide enhanced electrical safety by protecting against potentially lethal electrical shock. Motor with double insulation. 12 feet of industrial-grade electrical cable that is extra-long.
I used a polisher with 50 and 100 grit discs, as well as enough water to keep the slurry flowing. Everything went swimmingly.
I have approximately 5 hours of use left on the polisher at this point.
After a slip and fall accident, I was unable to work for approximately six months.
I’m back to work, and I’ve pulled out the polisher and connected it to the computer so I can finish my last counter top, at long last.
The polisher started slowly, then gray smoke poured out of the front, accompanied by the smell of burning electricity.
The breaker never got a chance to kick.
I really wanted it to be a dependable tool, and it was not.
