In this package, you will receive a granite bullnose tool as well as an abrasive polisher, a diamond profile wheel B10, and a set of four granite polishing pads (4-inch granite polishing pads) “Rubber backing pad set with a flexible rubber backing. The 5″ Stone Wet Polisher with DTM+ motor gear system provides increased power and optimal speed for stone concrete wet polishing or dry polishing; it can also be used for dry polishing. The speed of either stone polishing process can be controlled with a variable dial. RPMs range from 700 to 3000 depending on the application.
The Stadea Diamond Profile Wheel Demi B10 (3/8”) is included in the kit “Bullnose tool for granite edge shaping (approximately 10 MM). Additionally, the Stadea Series Ultra D Wet 4 is included “Diamond Granite polishing pads are a set of seven pads that are specifically designed for granite and quartz polishing. In addition, a 4″ semi-flexible rubber backing pad with a 5/8″ 11 thread is included. Seven granite polishing pads are included, one for each of the following grits: 50, 100, 200, 400, 800, 1500, and 3000.
Its ergonomic grip-size and long, out-of-core, soft back handle design transfers minimal polisher weight to the back handle, thereby reducing back hand fatigue. This, combined with the innovative head heavy polisher design, transfers machine weight to the stone concrete polishing surface, thereby increasing polishing pressure naturally and assisting in enhanced polishing performance, while also reducing back hand fatigue. The out-of-body back handle eliminates hand blockage in the air vent, resulting in increased motor performance and durability.
A built-in water quick-connect that connects to a standard water hose is included. Controlling the water pressure, using a water stopper, etc. Extra-long water line, water flow line under the polisher that does not interfere with polisher handling while in use, three-hole 120 degree water hole for even water distributio.
For easy removal of tool accessories, arbor locks are used. Soft-start, one-push power start & lock switch for the polisher for ease of use, splash guard with vacuum connector for water and dust control, and a reversible blade for versatility. Dual handle for a variety of applications. For stone polishing, a top D-handle is a must, as is an ambidextrous side handle for easy multi-purpose use, and an ergonomic backhandle. Class-A GFCIs are designed to provide enhanced electrical safety by protecting against potentially lethal electrical shock. Motor with double insulation. 12 feet of industrial-grade electrical cable that is extra-long.
Designed for granite edge polishing, the Stadea SWP111K Granite Edge Polishing Tools Kit with Granite Bullnose Tool includes everything you need. The kit includes a 5″ DTM+ Stadea Wet polisher with a 3/8″ diameter, a B10 Demi Bullnose profile wheel, and four 4” DTM+ Stadea Wet polishers “a set of diamond polishing pads for granite polishing that includes seven pads and one backing pa.
Designed to Exceed Expectation.
The machine is equipped with a durable DTM+ Motor Gear System that ensures the optimal speed and power required for stone wet or dry polishing and fabrication.
The use of a head heavy polisher in conjunction with an out of core back-handle design reduces back hand fatigue while simultaneously increasing pressure on the polishing surface of granite concrete.
Grip-Size Out of the Core has been improved. While in use, the ergonomic Back Handle design helps to reduce back hand fatigue. From the classic oversize main body hand-grip across the air vents comes a new, more comfortable back hand grip. It prevents air-vent hand blockage, which improves the performance and durability of the motor.
Electrical Safety is very important.
GFCI – A device that cuts off electricity in the event of a potentially hazardous electrical shock.
Electrical safety is improved by using double insulation.
Utilization Eas.
Underwater Feed – Reduces polishing interference to a minimum.
Controlling the water pressure and shutting off the wate.
Water quick-connect from water hose is built into the unit.
Water sprayer with three holes for even water distribution to unclog cut particles and unclog clog.
A water splash guard is used to control water spillage, and a vacuum connector is used to reduce dust during dry polishing.
Arbor Lock Button – Allows for the release of accessories from the polisher arbor without the use of a tool.
Power Lock Switch – A single push lock that allows for effortless continuous operation of the machine.
Adjusts the speed to the specific application for specific stone wet or dry polishing using a variable speed dial.
Handle with an ergonomic design – for a comfortable grip and the best polishing performance.
Dual Front Handles – Top D-Handle for stone fabrication, and a side handle for general purpose use.
Left and right handed users can use the ambidextrous side handle.
Long power cord and long water line – to make it easier to reach long counters and sinks.
The polisher was doing a fantastic job on the edge of a granite slab at the time. After setting the tool down to change the pad to the next one, the polisher refused to turn back on again. One time, I was successful in getting it to restart by repeatedly flipping the switch. Then, after letting go of the trigger, he was completely deaf. I’m unable to get it to restart. Dead.
