The use of an electric glue gun with mechanical feed ensures that the glue stream flows consistently.
For continuous use, a melting capacity of 7.5 grams per minute is required.
A seven-minute warm-up period is required to reach a controlled melt temperature of 400 degrees F.
No-drip nozzle for clean and precise applicatio.
Lightweight for long-term comfort and convenience.
The Steinel 33241 GlueFix 3002 glue gun produces a continuous glue stream at a rate of 7.5 grams per minute at a temperature of 400 degrees Fahrenheit, which is controlled electronically. It is equipped with a mechanical feed for glue sticks, which allows for precise control of the glue stream to be maintained. Warming up takes only seven minutes, thanks to the no-drip nozzle and a metal stand that comes with the gun. Because of the lightweight and soft grip, the gun can be used in a variety of industrial, home repair, and craft applications for extended periods of time. These applications include bonding parts and wires in electronic devices, recoating chair seats, as well as assembling foam model airplanes and toys.
Specification.
Temperature of operation: 400 degrees Fahrenheit (204 degrees Celsius. Capacities: 7.5 grams per minute of meltin. time to warm-up: 7 minute. Glu. Within the temperature range, it accepts glue sticks with diameters of 0.50″ and 0.44. The diameter of the nozzle is 0.08 inches (2 mm. Weight: 0.71 poun. 7.50 x 8.50 x 1.85 inches in size (H x W x D).
Height (H) is the vertical distance measured from the lowest to the highest point; width (W) is the horizontal distance measured from left to right; depth (D) is the horizontal distance measured from front to back. Cord de alimentatio. Six-foot rubber hose with double insulation and industrial grade rubber. [Confirming with Steve D. that this is correct. Certifications for the voltage 120 VAC / 60 H. Listed by the UL and CS. Warrant. For a limited time only (one year).
Glue guns, also known as hot-melt adhesive guns, are hand tools that are used to apply melted adhesives to a variety of surfaces. As a solid stick, the adhesive is mechanically fed into the gun and melted either electrically or with butane gas before being dispensed as a liquid onto the surface that is to be bonded. To bond materials such as lace, paper, wood, plastic, and metal, glue guns are widely used in crafts and home repair. Glue guns are also used in industrial settings to assemble parts and close paperboard cartons, among other things. There are several advantages to hot-melt adhesives over solvent-based adhesives, including the fact that they produce little or no volatile organic compounds (VOCs), which can be a long-term health hazard; that they solidify quickly without curing or drying; that they have a long shelf life; and that they do not lose thickness during the solidification process. p.
Heat guns, glue guns, gas torches, and sensors are all manufactured by Steinel. In addition to meeting the requirements of the International Organization for Standardization (ISO) 9001:2008 standards, the company is in compliance with the Restriction of Hazardous Substances (RoHS) directive.
Glue sticks with a diameter of 0.5″ are used in the glue gun (sold separately).
The flow is extremely precise. The perfect bead, especially when combined with the 1mm tip, is found here.
