Wet Pads for Granite, Glass, and Quartz PolishingWet Pads are made for a great finish when polishing. Velcro-backed polishing pads make it easy to connect and remove them, with a water hole in the middle. Velcro backers in different colors make it easy to see where the polishing pads are.
It comes with a 3-inch polishing pad kit that has a hook and loop back and can be flexible. Superior Velcro and Resin give a professional look. Ideal RPM is 2200, and the max RPM is 12000. Use between 2500-5000 RPM to keep your surface safe.
Wet PolishingCan be used for both wet polishing and dry polishing. Keep the surface wet with water to get a shiny finish. For Granite, Marble, Concrete, Travertine, Terrazzo, Stone, and so on. Work at speeds below 4500 RPM.
People use it all over the place.
3 inch Diamond Polishing Pad for Marble, Granite, Quartz, and Concrete Polishing. This pad is great for polishing granite edges, granite flat surface polishing, quartz edges, glass polishing, and other hard stone flat or contoured surface polishing. It also works well for polishing glass.
There are 10 diamond polishing pads in this kit: 50#, 100#, 150#, 300# and 500#. There is also a rubber hook and loop back pad. It’s easy to tell which polishing pads are which because they come in different colors and have the word “Grit” written on them.
It comes with 11 diamond polishing pads and 10 3 inch wet polishing pads. It also comes with a yellow backer pad.
♥ ♥ Why Choose Us? ♥ .
1, 4 inch Diamond Polishing Pad for Marble, Granite, Quartz, and Concrete Polishing, as shown. It is mostly used to polish Shicai stone, glass, and ceramics.
As a result of the sanding and polishing, he or she will be more beautiful.
In 3, there is a lot of grinding power and a lot of resistance to wear, which is good. Marble and granite floor restoration is the main use for this tool.
Rubber Hook and Loop Backing Pad: 4, 1 Pc.
Here are some of the specifics.
The size is 100 mm/4″.
This is what the diamond powder is made of. Resin is a powder.
A diameter of 80mm (3.
The inner diameter is 16m.
M14 threa.
In this case, the thickness is 3 mm.
Grits #50, #100, #150, #300, #500, #800, #1000, #1500, #2000, and #3000 are in this set.
In the package.
In this picture, there is a 3 inch by 1 inch 50# polishing pad.
The pad is 3 inches long by 1 inch wide and has a 100# rating.
At least one 3 inch by 3 inch pad with a 150# polishing pad.
The pad is 3 inches by 3 inches and has a 300# finish.
500#Polishing Pad: 1 x 3 Inch x 3 Inc.
An 800# polishing pad that is three inches long and one inch wide.
1000# Polishing Pad: 1×3 Inch 1000# Pa.
Polishing Pad: 1×3 Inch 1500# Polishing Pa.
3 Inch 2000# Polishing Pad: 1 x 3 Inc.
3000# Polishing Pad: 1 x 3 Inch 3000# Polish Pa.
1 x Back Holder for the Polishing Pa.
These pads were very hard and didn’t fit the counter. As I went through each pad, I tried to get the shine back in one area of counter that was near the sink, where it got a lot of water.
The pads didn’t work very well, so I used water and a lot of grits to clean for a long time. When I saw how the product was described, I thought I was going to get a lot more shine than I did. I bought the granite powder and used a hog’s hair pad to make it shine even more. To save money, I tried this way first, but it didn’t work for me.
