A lot of different things. Suitable for water, alcohol, coolant, machine oil, soap, cutting fluid, and other liquids.
a fully sealed air-tight universal join. Free to move and air-tight.
Copper joints and a precision throttle valve for air and liquid inlet make it easy to keep things sealed.
Pure Copper Filter: Filter out impurities in the liquid so that impurities don’t clog the pipeline.
Repeated use: Plugging and unplugging, no air leaks, and nothing falling off.
Taisher is dedicated to making high-quality products and giving each customer the best customer service.
Use a medium to get the job don.
In the process of making machine tools, like engraving, drilling, tapping, decontamination, cutting, and so on. It is used to keep the cutting tool’s spray from getting too hot. This includes precision carving high-gloss machine and aluminum processing machine.
For example, it can be used to cool down a machine that punches out things and to polish the back cover of your cell phone. It can be done all at the same time, which means the tool will last longer and the product’s finish will be better.
Use all four steps.
2. Connect the pipe that sends liquid in. Then, connect the intake pipe to the car’s engine. 3. Put the head of the filter into the box. 4. After the valves open, you can change the flow through two throttle valves.
For turning and milling stainless steel, I needed a mist system to keep the bits from getting too hot. This one did the job. All the things I needed to connect the lines and push the coolant came with the car. First, it’s hard to figure out how to change the mist. It’s not that big of a deal, though. When I use both my milling machines and my lathe, I use the same set of tools. Just think of it as insurance for those pricey bits for your mill and lathe.
