This tool can cut three different types of tungsten, with three different angles for each one of the three different types of tips. 6 types of hole. At 15°, 1/16″ (1.6mm) is 1/16″ (1.6mm. 3/32 ” (2.4mm. 3/32 ” (2.4mm. 20. 3.0mm at 15° and 3.0mm at 20. When you grind on the tips, 15° is 30°, and 20° is 40°. Each type of diamond wheel has three holes, so it can grind a different circle. This will cut down on the number of diamond wheels used two times.
It comes with a pack of screws, tungsten electron sharpener, diamond chip, and other tools.
The tungsten sharpening tool also has a tungsten cut-off port. After the tungsten you’re using is worn or dirty, you can cut it with the cut-off port. This way, you can use it again.
Tungsten electrodes of different diameters are usually used in traditional welding procedures in a wide range of industries. During these kinds of procedures, an arc is made between the metal to be welded and the end, or point, of each of the electrodes. Over time, the electrode point wears down or gets damaged, which stops or reduces the amount of current that can be sent. To make sure that welds are both good and efficient, electrode points need to be “dressed” (reshaped and sharpened).
Among the things that are sold are.
A single electric mil.
There is 1 x grinding head.
10 times as much diamon.
a package with a lot of thing.
I bought a pack of screwdriver.
Well, I thought it wasn’t that special, but I just wanted to let people know that they’re going to get a dremel box with a vicover grinder, which is kind of weird. I don’t think this tool will last very long.
