For curved cutting the blade should be suitable for the radius of the curved cuts. Never attempt to cut curves that are too tight for the width of blade in the bandsaw. A wider blade is recommended for straight cutting because it will follow the cutting line with less deviation than a narrow blade.
Where a risk assessment highlights the need, consider wearing cut-resistant gloves when bandsaw blades are not moving. Bandsaws may develop a regular ‘click’ if the blade cracks and is likely to break. Make sure material moves smoothly against the blade as it is cut, to avoid twisting the blade, stalling or going off the line of cut.
the bandsaw is usually isolated from the main electricity supply when Related Question:
What are machine safeguarding requirements?
Machine safeguards must meet these minimum general requirements: Prevent contact: The safeguard must prevent hands, arms or any other part of a worker’s body from contacting dangerous moving parts. Be secure: Workers should not be able to easily remove or tamper with the safeguard.
What is a pinch point OSHA?
“Pinch point” means any point other than the point of operation at which it is possible for a part of the body to be caught between the moving parts of a press or auxiliary equipment, or between moving and stationary parts of a press or auxiliary equipment or between the material and moving part or parts of the press
What are two types of primary safeguarding methods OSHA?
Primary Safeguarding Methods Two primary methods are used to safeguard machines: guards and some types of safeguarding devices. Guards provide physical barriers that prevent access to danger areas.
What is the machine safety?
Machines can help improve production efficiency in the workplace. However, their moving parts, sharp edges, and hot surfaces can also cause serious workplace injuries such as crushed fingers or hands, amputations, burns, or blindness. Safeguards are essential to protect workers from injury.
Which type of guard shuts down the machine when the guard is not securely in place?
Interlocked guards shut down the machine if not securely in place, or if they are disengaged.
What is a barrier guard?
Barrier Guards are appropriate safeguards for full revolution and part revolution mechanical power presses. They are designed to keep the operator’s hands and arms from entering the “danger zone” as prescribed by the particular machine.
What is a nip point?
Woodworking » Nip Points In-running nip points (or pinch points) are a special danger arising from rotating or reciprocating parts. They occur whenever machine parts move toward each other or when one part moves past a stationary object.
Where are pinch points found?
Pinch points are commonly found at a machine’s point of operation, or where the work is performed, and near gears, rollers, weights, doors, hinges, hand tools, and lifting equipment. Hand hazards can cause bruising, cuts, sprains, fractures, breaks, punctures, lacerations, crushing and even amputation.
What is an example of a pinch point?
Pinch points commonly impact fingers and hands, but can impact any area of the body. The injury resulting from a pinch point could be as minor as a blister or as severe as amputation or death. Conveyors, gears, loaders, compactors and other moving equipment are examples of machinery with pinch points.
What is safeguarding in OSHA?
Moving machine parts have the potential to cause severe workplace injuries, such as crushed fingers or hands, amputations, burns or blindness. Safeguards are essential for protecting workers from these preventable injuries.
What are some basic safeguarding methods?
Methods of Safeguarding These can be presence-sensing devices, pullback or restraint straps, safety trip controls, two-hand controls, or gates. Automated Feeding and Ejection Mechanisms – These eliminate the operator’s exposure to the point of operation while handling stock (materials).
What are the three basic means of safeguarding machinery OSHA?
Machine Guarding eTool All machines consist of three fundamental areas: the point of operation, the power transmission device, and the operating controls.
What is electrical safety?
Electrical safety refers to any type of precaution taken to protect against electric currents. Contact with electricity can cause serious injuries, including: Electrical shocks. Electrical burns.
Why are safety devices important?
Safety equipment is designed to help you and your workers avoid getting hurt on the job, or at least minimise the physical effects of an accident or workplace incident if it occurs. Without proper safety equipment, you and your workers significantly increase your risk of getting hurt.
How many main types of machine guards are there?
There are four main types of machine guards: fixed. interlocked. adjustable.