MT2 Rotary Table, Horizontal and Vertical Rotational Bor.
Indexing Steel Dividing Plates with all of the necessary Accessories is included in this package.
a Tailstock that is suitable for the HV4/HV6 Rotary Table and can be adjuste.
Manual de operación y funcionamiento gratuito. Do not buy it from ASSORTSMACHINETOOLS; instead, look for it from another tagged seller.
ONLY GENUINE ASSORTS PRODUCTS SHOULD BE PURCHASED FROM SELLER-ASSORTSMACHINETOOLS.COM. NOTICE: Other forcibly tagged sellers are not authorized to sell ASSORTS BRAND PRODUCTS, so please keep this in mind!!.
HV6 Rotary Table, Dividing Plate, and Tailstock are included in the price. Se. Table with a rotary motio. 150 mm in diameter ” (6″. Height in total: 80 mm (3-1/4 in) “) ) ) ) ) ) ) . In vertical position, the center height is 105 mm. The worm-gear ratio is one to ninety, which means that one rotation of the handle will turn the table by four degrees. Resettable dial and handwheel graduated in seconds; table graduated 360 degrees; resettable dial and handwheel graduated in seconds. The vernier scale is calibrated to a time interval of 10 seconds. The table’s center bore measures 2 MT. 2 Oiling Points for direct lubrication of the Table, resulting in a longer life and improved performance over time. It is possible to clamp it in both horizontal and vertical positions. Indexing plates are included, as well as a tailstock, to provide a complete indexing solution for the user. A manual on safety and operation is also included. More information on the Dividing Plate can be found here. . The HV4 and HV6 Rotary Tables are designed to fit a set of three dividing plates. The diameter of the plate’s center hole is 21 mm. The number of holes in each plate is specified. Plate A has the numbers 15, 16, 17, 18, 19, and 20. Plate B has the numbers 21, 23, 27, 29, 31, and 33. Plate C- Numbers 37, 39, 41, 47, and 4. It is supplied with a brass stopper key, a bracket, a crank handle, and mounting screws, among other things.
After much deliberation over whether or not to purchase a rotab, I finally took the plunge and am quite pleased with my decision. It came down to this or the Grizzly H7527, and I decided to take a chance and go with this one. I received it in three days, as it was shipped from India to San Diego. The ground surfaces of the table and tail stock are particularly attractive. At first, the crank handle provided some resistance, but after spending a significant amount of time cleaning and lubricating it, it now operates as smoothly as butter. I noticed that it was missing a manual, so I contacted the seller, who responded the next day with a digital copy of the manual.
After shipping, it was $100 less expensive than the Grizzly model, which I found to be quite satisfactory.
