It has two speeds: 0-350rpm and 0–1400rpm with no load. To set the torque: 10mm chuck.
One battery with 1300mAh of Li-ion power.
It takes about 80 minutes to charge quickly. a toolbox and a magnetic flexible shaf.
3 twsit drills: 5/32 “, 3/16”, 15/64..
6 pieces of S2. P1, P2, P3, 15/64, 5/32, 1/8, and 50mm bits..
When you use this drill, the bit holder moves. At first, I thought the bit was bent. I changed parts and I had the same problem again, so I did that. I rolled both pieces on the counter. They were fine. So, I thought about the drill next. Drilling without a bit made the holder move.
The battery charged quickly. A lot of people say that the AC adapter is very light, but this isn’t true. The cell phone charger weighs about the same as this thing because it’s so small.
The brightness of the light is great, but you can’t use it without running the drill. The only thing it’s good for is seeing the area underneath whatever you’re drilling. It won’t help you to locate a pencil or punch mark because you can’t use it without the drill already running and the bit blocks the light.
I’m going to return this and buy something of better quality instead.
