As mentioned, most chainsaw mills clamp the chainsaw bar. Chainsaw mills fall into two categories: edging mills and horizontal mills. Keep reading to learn more about some of the best chainsaw mills on today’s market.
Choosing a chainsaw mill with a maximum thickness size of 13″ is considered as the best option rather than chainsaw mill with 10″. Cost Effective – Although, most of the chainsaw mills are not cost affordable but it is a one-time investment, why because the chainsaw mill comes with a good warranty. Time Taken – Bandsaw mills work effectively and quickly for typical lumber operations, whereas the chainsaw mills are time consuming and create more sawdust while operating.
Despite these concerns, it is still a highly useful piece of gear that will allow you to mill your own wood using your chainsaw. This convenient chainsaw mill is a lightweight and portable piece of kit that will give you the flexibility to cut trees into boards wherever you need to work. Here we have one more affordable chainsaw mill that will allow you to convert your chainsaw into a machine that accurately produces boards, planks and more.
Chainsaw mills are sometimes called Alaskan mills because it’s in that rough, wild country where these things first caught on. Dollar-for-dollar, Granberg’s G777 chainsaw mill is the best investment in the class of chainsaw mills we reviewed. RCTEC’s 24-inch chainsaw mill is another chainsaw mill that works best as a second mill in your inventory.
top 5 chainsaw mills Related Question:
Are chainsaw mills worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
How big of a chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
How thin can a chainsaw mill cut?
The Alaskan Mill Mark III Attachment can cut boards as thin as 1/2″ and as thick as 13″. Setup and make your first cut, remove this first slab, then use the Mini-Mill II to edge the log.
Can you mill with a 460 rancher?
As I’ve stated before, milling is the toughest task you will put your chainsaw through and having that power is great. But the Husqvarna 460 rancher also has its strong points, and one of the biggest is it won’t wreck your wallet.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
What chainsaw do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
How thick should I mill slabs?
Generally I mill slabs at 2 1/2 – 3 inches thick….. stack and sticker with weight on top.
What is the smallest diameter log worth milling?
I always tell my customers that anything smaller than 8″ on the small end is usually not worth the trouble. Some customers take it to heart and some will throw in everything down to 4″. I will saw a 6″ log if it’s straight but the 4 and 5 inch stuff usually gets put aside.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Can you use a chainsaw on lumber?
Yes, you can use a chainsaw to cut wet wood.
What is a chainsaw mill used for?
A chainsaw mill or PortaMill or Alaskan mill or Alaskan sawmill or Logosol sawmill is a type of sawmill incorporating a chainsaw, that is used by one or two operators to mill logs into lumber for use in furniture, construction and other uses.