Buy TOPA SPORT 4500Psi/30Mpa/300Bar Small Portable Compressor with Oil-Moisture Filter High Pressure Oilfree PCP Air Compressor For Inflatable Hunting, use 12V Car DC or 110V AC at home (Black)

Portable PCP Air Compressor: The portable compressor is powered by either a 110V outlet or a 12V battery that is connected to the vehicle. Incorporated into the design are a loading pressure of 300 bar/4500Psi/30Mpa, a pre-set pressure and an automatic stop setting, making it suitable for use with any type of pre-compressed air rifle. An anti-explosion valve and cooling system are also included. A built-in thermometer is used to monitor the temperature of the compressor and, as a result, prevent internal overloading.

Water/Oil-Free & Oil-Moisture Filter: Because our portable pcp compressor does not require the addition of oil or the circulation of cooling water, it eliminates the need for an additional water pump and simplifies operation. The high-capacity fan integrated into the compressor can significantly improve cooling efficiency while also allowing the compressor to continuously fill your air gun. This will save you a significant amount of energy in the future.

Power Supply Options: 12V DC in the car or 110V AC at home: Our pcp air compressor has two different power supply options.

The air compressor can be powered by a 12V car battery, as well as by a 110V household alternating current power source. This will increase the utility of this air pump because you will be able to use it anywhere.

The high-pressure air compressor can easily achieve 300Bar/4500Psi/30Mpa, which is sufficient for most air guns’ air pressure requirements. It also has an auto-shutoff feature. In addition, it performs the extremely useful function of regulating the inflation pressure of the tire. When the preset air pressure is reached, the filling process can be stopped automatically while the cooling fan continues to run. The automatic shutdown will be delayed by approximately 6 seconds in order to ensure that there is sufficient air pressure.

An 8MM female threaded connector is used for the inflator nozzle, allowing for quick connection and disconnection. An oil-water separator is also used with this connector. It is compatible with PCP airsoft/pistols and paintball cans, among other things. The oil and water separator on the hose is a re-usable piece of technology. It has the ability to efficiently filter out oil and water from the air and produce clean and dry high pressure air.

Leave a Reply

Your email address will not be published. Required fields are marked *