Ideal for making strong, reliable, edge-to-edge and miter corner joints that are both strong and reliable.
It makes precise joints all the way along the length of the work piece.
Anti-slip pads help keep the drill from moving during the drilling process, which makes it easier to get a fast, strong joint.
The motor housing can be easily removed so that worn carbon brushes can be changed.
The dust port can be used to connect to an extraction system to keep the work area clean and safe.
Included parts. 2 x 5/16 inch drill bits, a dust port adapter, a hex key, and the manual.
An overview of what this item is abou.
Included parts. 2 x 5/16 inch drill bits, a dust port adapter, a hex key, and the manual.
There is a Manufacturer.
Triton Precision Power Tools was founded in 1976 and makes a wide range of power tools for people who are good at working with wood. For example, Triton has made some of the best routers in the world as well as sanding products and circular saws. They also have a history of innovative design that is tailored to woodworkers’ needs.
The media couldn’t be loaded because it was too big to move.
It looked like Triton had fixed a lot of the problems with this unit in more recent reviews. So, I decided to roll the dice in order to see if I could get one. It is clearly better than previous generations. There are no more indentations on the face, the springs are only a little stiff, and I have measured the angles on the top fence to be very close to correct. It’s clear why the drill bits aren’t square with the top fence. For some reason, Triton doesn’t let you change the alignment of the bits and the top fence, which must be perfectly aligned with each other. Others have seen this happen with previous units, and it still happens with this more recent one. This problem doesn’t make the unit unusable, but it does mean that every set of holes you drill must match the set that you put next to it. Even how the tool is aligned when the holes are cut is important. Because they won’t be straight. One hole is always going to be a little lower than the other one, no matter what. That misalignment has to be the same as the rest of your piece, or it will pull it all out of line.
Wasn’t it worth it to take the risk based on other reviews. I don’t think this is a good unit.
