turn a circular saw into a track saw

There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone. The basic system consists of a base that you attach to your own circular saw, or you can buy a saw with a pre-attached base from EurekaZone, and an aluminum guide rail. Check out the into video of the basic track saw kit.

Cut a thin piece of the plywood with the circular saw and attach it to the top of the rest of the plywood using wood glue. Be sure to have excess plywood on both sides of the glue joint. Place the circular saw on one side of the straight edge and cut the excess plywood.

There are retro-fit products available that turn your circular saw into a track saw. “With the saw in place flip the fence over with the factory edge facing right and, up against the saw and then strike a line on each side to mark its basic location. Measure 6” from the right side of the fence to the right side of the jig and make a mark at each end. Clamp the jig down and run the saw along the saw guide again keeping even and consistent pressure against the fence.

turn a circular saw into a track saw Related Question:

Can I convert my circular saw to a track saw?

There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone.

Can you make a track saw?

Track saws are easy and affordable to make, and the good thing is that the DIY track saw still cuts fast, giving you accurate sheets of plywood for any woodworking project you might have.

Can you use a DeWalt circular saw on a track?

The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.

What is the difference between a circular saw and a track saw?

The critical difference is that a circular saw has a long and rectangular rail in the front, unlike its counterpart. A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none.

Can you use a guide rail with a circular saw?

A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.

How do you use a circular saw without a table?

Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.

Why is festool so good?

So what makes Festool so good? We believe it’s because Festool has focused on creating high-performing tools that are robust, reliable and precise. Their numerous innovations, like their dust extractors and cordless options, put Festool in a league of their own.

Are track saws worth it?

Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.

Is track saw safer than table saw?

Track saws are much safer than table saws. Table saws are more powerful than track saws. Track saws allow you to cut large sheet goods that may be difficult to handle on a table saw. Table saws allow easy repeatability when making rip cuts.

How does a track saw stay in place?

While it cuts, a plunge-cut track saw rides along a stable track, which stays in place thanks to non-slip, non-marring pads on its underside.

Are circular saw tracks universal?

The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.

How do you use a circular saw without a sawhorse?

In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.

Can I use a jigsaw instead of a circular saw?

Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.

Is Festool made in China?

Festool designs and engineers its portfolio of innovative power tool products in its home country of Germany and all Festool power tools are manufactured in Europe.

Is Festool made in the USA?

Festool products are primarily manufactured in Neidlingen (Germany), Illertissen (Germany), and Česká Lípa (Czech Republic). In July 2017, Festool opened its first North American production line at its Lebanon, Indiana, facility, where it produces mainly guide rails for its track-saw system.