There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone. The basic system consists of a base that you attach to your own circular saw, or you can buy a saw with a pre-attached base from EurekaZone, and an aluminum guide rail. Check out the into video of the basic track saw kit.
Cut a thin piece of the plywood with the circular saw and attach it to the top of the rest of the plywood using wood glue. Be sure to have excess plywood on both sides of the glue joint. Place the circular saw on one side of the straight edge and cut the excess plywood.
There are retro-fit products available that turn your circular saw into a track saw. “With the saw in place flip the fence over with the factory edge facing right and, up against the saw and then strike a line on each side to mark its basic location. Measure 6” from the right side of the fence to the right side of the jig and make a mark at each end. Clamp the jig down and run the saw along the saw guide again keeping even and consistent pressure against the fence.
turn your circular saw into a track saw Related Question:
Can I convert my circular saw to a track saw?
There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone.
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
What is the difference between a circular saw and a track saw?
The critical difference is that a circular saw has a long and rectangular rail in the front, unlike its counterpart. A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none.
Can you use Makita circular saw on track?
Depending which 18v Makita saw you have,there maybe an guide rail adaptor for it,so it can be used in the Makita track.
Can you make a track saw?
Track saws are easy and affordable to make, and the good thing is that the DIY track saw still cuts fast, giving you accurate sheets of plywood for any woodworking project you might have.
Why is festool so good?
So what makes Festool so good? We believe it’s because Festool has focused on creating high-performing tools that are robust, reliable and precise. Their numerous innovations, like their dust extractors and cordless options, put Festool in a league of their own.
Are circular saw tracks universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
Are track saws worth it?
Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Is track saw safer than table saw?
Track saws are much safer than table saws. Table saws are more powerful than track saws. Track saws allow you to cut large sheet goods that may be difficult to handle on a table saw. Table saws allow easy repeatability when making rip cuts.
How does a track saw stay in place?
While it cuts, a plunge-cut track saw rides along a stable track, which stays in place thanks to non-slip, non-marring pads on its underside.
What is a plunge saw used for?
Plunge saws are perfect for making smooth, straight cuts and are often used with a track or guide to improve accuracy. They work when the blade is plunged down to the required depth and engages with the workpiece.
Which Makita saw are compatible with guide rail?
Guide Rail Adapter, Circular Saws The Adapter allows Makita 18V Sub-Compact LXT Circular Saws to be used with Makita 55” and 118” Guide Rails, as well as select competitor rails (all sold separately).
Is Festool made in China?
Festool designs and engineers its portfolio of innovative power tool products in its home country of Germany and all Festool power tools are manufactured in Europe.
