1540mm/60.6inch ; Spring OD: 49mm; Material Width: 8; Material Thickness: 0.8m.
A drill press spring is included in the package with this tool.
. The drill press quill return spring is a good replacement for many drill presses with quill springs. This spring will return the quill to the top after you finish drilling. All kinds of vacuum cleaner coil springs, volume tube coil springs, and so on can be used with this tool.
Chemical Blackening: The performance of the product makes oxide films that keep the air out and stop rust.
Pay attention when you put in the springs. Don’t loosen the wire in the fixed springs. When installing, put the spring with a fixed wire right into the spring seat. The wire will slide out of the spring seat.
Description.
1. The drill press quill return spring is a good replacement for many drill presses with quill springs. This spring will return the quill to the top after you finish drilling.
All kinds of vacuum cleaner coil springs, volume tube coil springs, and so on can be used with this tool.
2.Chemical Blackening: The performance of the product forms an oxide film that keeps the air out and prevents rust.
3.Be careful when you put in the springs. Don’t loosen the wire in the fixed springs. When installing, put the spring with a fixed wire right into the spring seat. The wire will slide out of the spring seat.
Specification.
Spring Steel is the material of choice for this project.
After that, chemical blackening.
Material: 0.8mm thick.
Its width is 8mm.
Spring length: 49m.
About 1540mm, or 60.6 inches.
The inner mounting type is a hook.
A hook is used to attach the outside to the car.
In this package, you will find.
Spring: 1 x Drill Pres.
How would it have worked. It fell off as I was putting it in the spring housing for my drill press. The spring came out of its housing. It took me a long time to try every trick I could think of. I finally gave up. By then, the spring could not be turned back.
