While in use, the engine must be running at 12 volts and 130 PSI maximum working pressure.
1.27 CFM (cubic feet per minute. At 0 PSI, there is no free flow.
Vibration isolators and mounting hardware are included in this hardmount unit, which has mounting feet and four screw positions.
Stainless steel braided leader hose with 1/4 inch NPT inline check valve and swivel fitting already installed on the 18-inch leader hose.
It is recommended for use with an air tank of up to 1 gallon capacity.
Air Compressor is the item type.
Description.
The 100C Compressor from VIAIR is equipped with a 1.5-foot stainless steel braided leader hose, a swivel fitting, a 1/4-inch NPT Male Check valve, rubber isolated mounting feet, hardware, an air filter, and insulated electric terminals, among other things. This oil-free air compressor operates at 13.8 volts from a charging car battery and is typically used in conjunction with air tanks that hold 1.0 gallon or less of compressed air.
UM: Each and every on.
Warranty: The product is covered by the manufacturer’s warranty.
Approximately 9 by 6 by 8 inch in size.
5 lbs. is the weight of the box.
Make sure to read the specifications to determine whether or not the compressor is large or small enough for your application before purchasing it. People claim that this is a weak compressor, but in reality, it isn’t if you aren’t trying to run it at 290psi all of the time. In a 1 gallon tank, I use a 130psi pressure switch and it works flawlessly. Filling from zero to 100psi takes less than 1 minute, and filling from 100 to 130psi takes about 15 seconds.
