VOLLTEK’s wood router tool has a powerful 6.5Amp, 1.25HP motor. It has 6 variable speeds that can be set from 10,000 to 32,000 RPM for a wide range of woodworking materials.
With a palm router, you get very smooth and clean cuts because it runs at the same speed and power all the time.
For better control of the trim router, the motor has a soft start.
EASY AND CORRECT US. To cut more accurately, you can set the depth with rack and pinion. You can cut in either inches or millimeters. With a quick release cam lock system, it’s easy to change the depth and put the base back on.
For added comfort and durability, the housing is made of cast aluminum and has a vibration-reducing soft-grip handle. A dust hood comes with the vacuum so the job site can be kept clean better.
I was able to get this router up and running in about 10 minutes after I opened the box. It’s very light and easy to move around. Like the system for setting and adjusting depth, but I have noticed that even after fully tightening, the bit can slip down a little when you put more than very light pressure on the router. This can happen even if the bit is fully tightened. So, I need to be very careful and check the depth often. As long as you don’t need much power, this would be a good trim router.
