3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide. Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees. With a 3.5-amp motor and a 9-3/4 inch throat, this beast will attack boards with cuts up to six inches deep and 9-3/4 inches wide.
Its amazing cutting ability and high cut capacity of 6 inches, which makes it as strong and deep as a standard table saw but more maneuverable in terms of curved and variable cuts. One of the most significant advantages of the 3962 stationary band saw is that it will not give you kick back as you use it. WEN 10-inches band saw has wonderful re sewing capacity.
The Wen 3962 band saw has a powerful motor that performs consistently, it comes with a 3.5amp motor and can cut upto 6 inches of depth. First-time users with little to no experience on powered saws may find the Wen 3962 Band Saw to be a dangerous machine. If you are looking for an affordable band saw which comes under the price of $170, then Wen made another band saw, which is more affordable than this model, and we have made a detailed review of that, Wen 3959 Bandsaw is the model, you can read the detailed Wen 3959 Bandsaw review to know more about it.
wen 2 speed band saw Related Question:
Why do bandsaws have 2 speeds?
The primary reason for speed adjustment on bandsaws is to accommodate different materials (mainly metal). That said, dropping the speed down for some operations can stretch the capabilities of an underpowered machine further.
What is the best speed for a bandsaw?
Bandsaw: Speeds. A common speed for the bandsaw is about one thousand feet per minute. Wood can effectively be cut at much higher speeds, up to and over five thousand feet per minute, but you should keep it slower because it’s safer.
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What is a band saw used for?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
How do you change the speed of a bandsaw?
Answer: Some models of bandsaws do provide the ability to alter the speed of the blade (usually expressed as FPM – feet per minute). The change of speed is usually accomplished by moving a drive belt to a secondary location on the pulley(s) of the drive pulley and motor pulley.
Can you use a metal bandsaw blade to cut wood?
What are the ideal conditions for cutting wood on a metal saw? While cutting wood on a metal bandsaw is perfectly fine, you should switch over to a 6TPI blade if you have the time or anticipate cutting a lot of wood.
What speed does a circular saw run at?
It is clear that in the speed range from 1173 to 1500 rpm, the circular saw would easily be- come unstable and pose a hazard to the people working with it. Critical rotational speed theory of the circular saw has been a subject of many scientific publications.
What RPM does a band saw run at?
Bandsaws always use 1725 rpm. The 3450 rpm are way too fast. From contributor R: Depending on the size of the wheels bandsaw blade speeds can vary between 2000 SFPM to over 4500 SFPM.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
What RPM should a metal bandsaw run?
You want the blade running at about 75 RPM for steel, 150 max. Any faster and you will work harden as you cut (due to heat build up) and fry your blade.
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How do you measure the speed of a bandsaw blade?
The formula to determine S.F.P.M. is: Motor RPM multiplied by the Motor pulley diameter divided by the Driven pulley diameter times the Bandsaw wheel diameter times pi (3.1416) divided by 12 = S.F.P.M.
How long is a 14 bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.