One of the features of this machine is the induction motor. It has 8-inches of swing, and its spindle can move 2 inches.
Includes a 1/2-inch keyed chuck and a place to keep your keys.
At 750, 1100, 1500, 2100, or 3200 RPMs, the machine works.
Each side of the worktable can be turned up to 45 degrees in each direction. It is 6.5 by 6.5 inches and can be adjusted in height.
23 inches tall with a 7 by 11-inch base.
Remember when you could drill with the most precision. With the WEN 8-Inch 5-Speed Drill Press, you can drill through metal, wood, plastics, and more with ease. Don’t be fooled by our small size. Between the five speeds, the two-inch spindle travel, and the sturdy construction, you’ll have a lot more precision than you would with a standard drill that you hold in your hand. Our 2.3-amp induction motor has ball bearings to keep it balanced even when it’s running fast. By moving the belts on the two spindles, you can set your speed to 750, 1100, 1500, 2100, or 3200 RPM. The easy-to-read, lockable depth stop makes it easier to drill accurately and keep the same depth every time. The keyed chuck with the JT33 spindle taper can hold bits that are 1/20 to 1/2 inches in diameter (1.5 to 13 mm). The table turns 45° to the left and right so that it can be used for angled drilling. The base has holes in it that can be used to attach it to a bench or work stand. It is very easy to attach clamps and vises to the slotted table, which makes working on a project safe and effective. You get a two-year warranty on it because it’s made by WEN. You also get to use a customer service line that’s very helpful. In the past, you could drill holes in almost anything. Remember WEN, please.
Don’t make the table too tight, or the only part they don’t have for sale will break and it’ll be hard to finish your project. Unless you’re very clever, but even then. If you don’t have a router, you can use this to drill lowers without one. It worked great. Even though the table didn’t work. Don’t spend money on jigs and drill bits that are overpriced and take a long time to get to you. I was able to do my first ever and it was easy. As a superior aryan man, I knew it was going to be a sure thing. An end mill set for 15 dollars comes with cutting fluid, a few drill bits, a primer for 4 dollars, and a finish for 4 dollars. It also comes with a range time.
