Induction motor, 8-inch swing, and 2-inch spindle travel: This is the first thing you’ll see.
Product 1: It comes with a 1/2-inch keyed chuck and a place to keep your keys.
A product called Product 1 can run at seven speeds: 740, 1100, 1530, 2100, or 3140 RPM.
In this case, the worktable is 6.5 inches by 6.5 inches tall and can be turned up to 45 degrees in each direction.
A 2.5-amp motor turns the blade up to 2500 feet per minute in this second item.
It can make cuts up to 3-1/2 inches deep and 9 inches wide.
Second: This product is made with a 59-1/2-inch blade that can cut anything from 1/8 to 3/8 inches in size.
This 12-1/4 x 11-7/8 inch work table has a lot of space and can be turned up to 45 degrees.
Style:202. Drill Press + Saw, Black is the name of the model or pattern.
WEN 4208T 2.3-Amp, 8-Inch, 5-Speed Benchtop Drill Press with a 5-Speed Moto.
Remember when you could drill with the most precision. With the WEN 8-Inch 5-Speed Drill Press, you can drill through metal, wood, plastics, and more with ease. Don’t be fooled by our small size. Between the five speeds, the two-inch spindle travel, and the sturdy construction, you’ll have a lot more precision than you would with a standard drill that you hold in your hand. Our 2.3-amp induction motor has ball bearings to keep it balanced even when it’s running fast. By moving the belts on the two spindles you can set your speed to 740, 1100, 1530, 2100, 3140 RPM. The easy-to-read, lockable depth stop makes it easier to drill accurately and keep the same depth every time. The keyed chuck with the JT33 spindle taper can hold bits that are 1/20 to 1/2 inches in diameter (1.5 to 13 mm). The table turns 45° to the left and right so that it can be used for angled drilling. The base has holes in it that can be used to attach it to a bench or work stand. It is very easy to attach clamps and vises to the slotted table, which makes working on a project safe and effective. Because it’s made by WEN. A well-stocked inventory of replacement parts, and a customer service line that can help you if you need help. In the past, you could drill holes in almost anything. Remember WEN, please.
There is a 9-inch benchtop band saw that has a 2.5-amp motor and is black. This is the WEN 3959T.
When did you have a saw that was both small and powerful. The WEN 9-Inch Benchtop Band Saw cuts through boards up to 3-1/2 inches deep and 9 inches wide. The 1/4-inch blade comes with a 2.5-amp motor that rotates it at up to 2500 feet per minute. This saw has 59-1/2 inch blades that range in width from 1/8 to 3/8 inches. It can make both small and powerful cuts. 12-1/4 x 11-7/8 inches is the size of the large work table. It can be turned up to 45 degrees. This package comes with a miter gauge, a 2-1/2 inch dust port, a fence for straight cuts, and a blade guard that can be adjusted. Ball bearings make the blade move smoothly and last a long time so it can be used for a long time. When you buy your WEN 9-Inch Benchtop Band Saw, it comes with a two-year warranty, a network of skilled service technicians, and a friendly customer service line. All of these things are there to make sure you remember WEN, too.
Because of this, I’ve been having a hard time since day 1. Every other time, the chuck comes off. Due to the weight, I may have to return it while I can. UPDATE. The seller has great customer service. So I’m going to change my rating to 4 stars. They replaced the whole drill press, and it came a day after I got an email about it. Sunday at that.
