It’s good enough as a beginner’s tool, but when you’re established, you should invest in some more proper tools, for many reasons. A good wet saw does a better and faster job at almost everything you can do with both an angle grinder and wet cutter, once it’s set up. Second, there are health issues to consider when using an angle grinder: It’s very noisy, and very dusty, even if you use a dust catcher.
You can also cut tile with a 4-inch angle grinder with a stone blade attached, and while the cuts aren’t as clean as with a tile cutting board or a tile wet saw it is an acceptable method for rough cuts around heater vents, doorways and against walls where they will be covered by baseboard or finish materials. Cut directly down into the surface of the tile, making gentle passes across the lines of your cut while holding the blade of the grinder vertically against the tile and along the mark. While you could utilize an angle grinder, the lasting effect won’t be ideal as the cut will appear too clean and when slates are cut the correct way – hacked or nibbled – they showcase a natural-looking bevel along the front edge; an angle grinder will leave it looking dead straight.
Tile Cutter vs Wet Saw is a debate that seems to be endless. Tile Cutter Vs Wet Saw: Comparison Tile hardness- Wet saw is the clear winner here. Now you saw the comparison between Tile Cutter vs Wet Saw.
Cut clean, accurate circles and squares in stone and ceramic tile with an angle grinder. In this story, we’ll show you how to use an angle grinder with a diamond blade to cut perfect circles and squares in even the toughest tile. Flip the tile over and plunge the cut from the back.
Your two best tile cutting options are tile cutters and a wet saw. The guide above should serve as a good start in the tile cutter vs wet saw debate. Our experts would love to hear all about your project and help you decide between a tile cutter and a wet saw.
Notes: Members cut-off dates are set at the 25th of the month before the month of despatch. If you join us on the 24th September your first issue will be the issue due the following month ie. If you join us on the 26th September then your first issue will be the issue due in December.
“Sorry if this is a stupid question. Here in Indonesia most people use 4″ angle grinders to cut tiles, which are 24″x 24”. Mostly this is because most people only own an angle grinder and a drill and don’t have any other tools.
wet tile cutter vs angle grinder Related Question:
Is an angle grinder good for cutting tiles?
An angle grinder is a very handy tool to use for cutting tiles. It leaves a beautiful, smooth finish and is easy to use. When you are looking to buy an angle grinder, make sure that it has enough power to cut tile.
What is better a wet saw or a tile cutter?
Compared to tile cutters, wet saws are best for large projects. You can cut tile faster, easier, and with more precision than manual tile cutters. The only price to pay is the set up and preparation of the working area. Wet saws are recommended for large rooms or rooms with complicated floor plans.
Can you use an angle grinder as a wet saw?
You can also cut tile with a 4-inch angle grinder with a stone blade attached, and while the cuts aren’t as clean as with a tile cutting board or a tile wet saw it is an acceptable method for rough cuts around heater vents, doorways and against walls where they will be covered by baseboard or finish materials.
What is the benefit of a wet tile saw?
A wet tile saw resembles a small stationary table saw, miter saw, or radial arm saw, but it makes use of water to help keep a special diamond-encrusted blade cool during the cutting action. It is an excellent tool for safely and efficiently cutting ceramic and porcelain tile, as well as stone tile.
Should I get a wet tile saw?
No, you don’t, but a wet saw could be your best option. If you don’t use a wet saw, you’ll have to deal with lots of dust. Otherwise, just ensure that you’re using a diamond-embedded blade in a grinder or handheld saw. You also can use a tile cutter for some softer materials.
Can you cut tile without a wet saw?
If you want to cut tiles without a wet saw or even a tile cutter you can use a glass cutter/scribe or carbide-tipped pencil. Cutting tiles with a scribe can be done successfully on thinner glass tiles especially: Measure where the tile needs to be cut using a pencil alongside a metal ruler, draw a straight line across.
Can you grind ceramic tile?
Ceramic is a very hard material, and you need special tools to grind it properly. A ceramic grinder uses a metal (aluminum oxide or similar) grinding wheel. This is a wheel that has sharp metal flakes of aluminum oxide glued to the surface much like sandpaper. It will grind down a ceramic tile or object with precision.
Can I cut porcelain tile with a grinder?
Cutting Porcelain Tile with an Angle Grinder Using an angle grinder, a tile could cut into different styles. An angle grinder is suitable for both straight and circular cut. With an aggressive disc, the tool makes the process easier. Especially when a particular shape is required, the tool does amazing.
How much is a tile grinder?
grinder for as little as $50 and a dry-cut diamond blade to fit it starting at $20. In general, more expensive blades will last longer.
Are angle grinders variable speed?
Most angle grinders operate at just one speed, but if you’re looking for a more versatile tool, you may want a variable speed angle grinder such as this one from Bosch.
How do you cut porcelain tile without a tile cutter?
For any type of tile (like ceramic, glass, or porcelain), an angle grinder is best for round cuts whereas a glass cutter can make smaller cuts. And if you have a lot of tile to trim, a wet saw is one of the easiest, quickest options.
Can you cut porcelain tile with a diamond blade?
The best option for cutting porcelain tiles are diamond blades. They are made of steel with a diamond coating, making them very tough, durable and perfect for precise cutting. Blades for cutting porcelain tiles can also be used with other materials, such as concrete, granite or wall panels.
Can you use tile saw to cut wood?
You can use a tile saw to cut wood, although it is not the most precise or accurate saw to use. In addition, a tile saw is more dangerous when being used to cut wood. If possible, you would be better off using a circular saw or table saw.
Do wet tile saws make dust?
Reason #1: Wet tile saws reduce dust Silica in and of itself isn’t a problem, but when a diamond blade is grinding through it, it creates silica dust that contains microscopic crystals of the mineral. When inhaled, they get embedded in your lung tissue and can cause serious and permanent lung disease.
Can a tile saw cut you?
They cut with friction, not sharp teeth. As long as you don’t push too hard, it won’t build up enough friction to damage your skin (xpost from /r/gifs)
