Custom Welded Band Saw Blade that are manufactured with our precision ground “Rugged Tooth”. Our metal cutting band saw blades are an excellent choice for cutting a variety of all shapes and sizes of Steel; the progressive positive rake tooth pattern is designed to reduce noise, vibration and chatter, giving you a quicker sawing operation and extending blade life, resulting in a lower cost per cut.
Bi-Metal Saw Blades:Bi-metal band saw blades cover the broadest range of sawing applications. Carbide Saw Blades:Carbide band saw blades are your solution to cut through materials bi-metal and carbon steel blades just won’t cut. Hopefully, you found the above information helpful in determining which type of band saw blade to use for your application.
If the sheet metal is too thin for this to work with the finest tooth blade available, a useful trick is to put the metal between pieces of plywood, fiberboard, or soft thicker metal to support the blade. Our webpage How to use a BandSaw has a guide for selecting the proper pitch band saw blade for different metals and metal thickness. Recommended use of a CARBON STEEL BLADE Thickness of metal to be cut Blade Teeth per inch For high speed cutting of aluminum, brass, copper, soft bronze, magnesium, wood, mild steel and also tougher steels at slow speed.
what band saw blade for cutting metal Related Question:
Can I put a metal cutting blade on my band saw?
Salem Straub. Typically if you run a metal blade on a wood bandsaw the excessive speed (2000 sfpm+) of the wood saw will knock the teeth off of your metal cutting blade in a hurry. You could make it work, but you would have to slow the blade drive wheel way down. Think 250 sfpm to 80 sfpm.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Can a regular band saw cut metal?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What type of blade should you use for straight cuts?
Therefore, when cutting laminates, or any material where you want minimal damage, a “Clean for Wood” blade like the T101B should be your choice. It’ll give you that clean, straight cut you’re looking for. A Jigsaw Blade for Straight Cuts Won’t Cut Curves!
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
Can you cut metal with a wood blade?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
What is the difference between a wood blade and a metal blade?
Metal Cutting Blades have more teeth per inch for cutting harder, denser materials. They are typically 10 to 18 TPI, but can go as high as 24 TPI. They are also used for finish cuts in wood because they leave a smooth edge.
Can you use a band saw to cut wood?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.