A bandsaw will make many cuts with precision and speed-when equipped with the right blade for the application. Bandsaw blades differ in thickness, width, length, and tooth configuration. Every time you change from one bandsaw blade width to another, you have to reset the saw’s tracking, tension, and blade guides.
Next you need to figure out the width of the blade that will work for the type of cut you plan to make. Once you determine length, width and teeth per inch, you need to figure out what type of tooth configuration is right for the cut type and material you are cutting. There are three main types of bandsaw blade teeth: regular, hook and skip.
The wider the blade, the stronger the beam strength; therefore, a 1″ blade has far greater beam strength than a 1/8″ blade and will cut straighter and is more suitable for resawing. BLADE BACK- The back of the blade that runs on the back blade guide. BLADE MAINTENANCE- There is not very much that needs to be maintained on the blade, but below are a few points that will help you keep your blade in peak cutting performance.
With all of these things to consider, it is no surprise that you’re looking for an essential guide to bandsaw blades! The blade width determines how much your bandsaw will cut and the minimum number you want to cut. How many teeth you need for your bandsaw blade is another factor to consider when choosing your blade.
How-To’s for all Band Saw Blades Blade Width – Inches 1 Choosing the Correct Blade Width Radius Chart Blade Width When Selecting TPI remember: More TPI give a smoother but slower cut Fewer TPI allow a faster cut with a slightly rougher finish At least three teeth must be in the workpiece- the chart to the right will help you decide. Use a square to make sure you are not pushing the blade out of line and place a piece of white paper between the blade guide and the blade to allow for clearance. Premature Blade Breakage Thickness of blade too heavy for diameter of wheels and speed of machine Increase or decrease velocity Check wheels for defects Teeth too coarse for workpiece -use a finer pitch Decrease blade tension Decrease feeding force Brittle weld – increase annealing period, decreasing heat gradually Check for proper adjustment of band guides, saw guides, saw guide inserts.
what bandsaw blade do i need Related Question:
How do I choose a metal cutting bandsaw blade?
In general the following rule applies to choosing the speed of your bandsaw blade: The harder the material, the slower the speed; conversely, the softer the material, the faster the speed. The faster the speed, the finer the finish produced on the cut surface.
What is the best TPI for cutting wood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
How long is a 14 bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What size blade does a Milwaukee 2629 20 take?
MILWAUKEE Cordless, Portable Band Saw, 18V DC, 35 3/8 in Blade Length – 6AWC7|2629-20 – Grainger.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What is the difference between a wood and metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
How do you measure a TPI on a bandsaw blade?
To avoid stripping teeth, always have a minimum of three teeth in the work surface How to measure TPI: Measure 1 or 2 inches along the blade from the center of the gullet. Count the number of teeth in that space. This is the TPI.
What is a 24 tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
What is a 3h bandsaw blade?
Description. These are excellent-quality steel bandsaw blades that excel at ripping thick stock and resawing, and are also suitable for roughing blanks for carving or turning. The coarse 3 tpi hooked teeth power through hard woods and difficult grain, and have deep gullets for clearing sawdust.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.