A very short version of the answer is that chainsaw guide bars are usually interchangeable only if they have the same mount type, chain pitch and gauge. Sadly, the truth is that chainsaw bars are rarely completely interchangeable even within a brand. There are some positive exceptions when a bar can be fitted to a different mount: replacement bar manufacturers like Cannon, Oregon and Sugihara have developed bars with a generic mount geometry that makes them compatible with original bars of many different mount types.
With the diverse world of chainsaws, you may begin wondering if chainsaw bars are interchangeable amongst brand, size, and type. Chainsaw bar brands are not interchangeable because of the way chainsaw bars mount to the chainsaw. Chainsaw bar brands are not interchangeable because they attach to the chainsaw in different ways.
what bar fits my chainsaw Related Question:
Can I put a different bar on my chainsaw?
Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Are chainsaw bars and chains universal?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
Are all 18 inch chainsaw bars the same?
General chain lengths, like 18 inches, are not interchangeable. That’s because chainsaw chains actually have three measurements: number of drive links, pitch, and gauge.
Will a Poulan bar fit a Husqvarna?
The older Poulan bar slot is for larger bar studs which will fit on the smaller Husqvarna 435. Just needs a homemade wire adapter to snug it up. Poulan bar may oil through its adjuster hole, if not easy to drill a new hole. Only thing to worry about is chain pitch size and drive link gauge thickness.
Are chainsaw bars standard?
To preface, the standard bar lengths for chainsaws are 16, 18, and 20 inches. However, longer bars do exist and can exceed 24 inches. When taking a measurement, you should round to the nearest even whole number.
What sizes do chainsaw bars come in?
The most commonly used chainsaw bar sizes are 11 ″, 12 ″, 13 ″, 14 ″, 15 ″, 16 ″, 18 ″, 20 ″, 21 ″, 22 ″. The smaller chainsaw bar size is used for simpler jobs. For example, a chainsaw with an installed bar of 11-13 inches is used as a delimber, and is also used to cut small non-thick boards.
What size bar can I put on my Stihl chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
What size bars does Stihl make?
STIHL guide bars range from 10″ (found on our tree-trimming pole pruners) to an incredible 59″ (used in extreme felling operations).
Whats the difference between green and yellow Stihl chains?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker. I like full chisel and just keep it sharp.
Will a Oregon bar fit a Stihl?
The AdvanceCut guide bar features a small radius multi-rivet nose for good durability and control. Contact Oregon Customer Support to ensure the best fit for your chainsaw. Fits Stihl 024, 026, 026P, 030, 031, 029, 036, MS 280, MS 271, MS 270, 028, 032, MS 290, 034, MS 260.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What bar will fit Poulan chainsaw?
050 Gauge Pro 91 Chainsaw Bar fits Poulan Chainsaws. 12″ 3/8″ Pitch . 050 Gauge Pro 91 Chain saw Bar fits Poulan Chainsaws.
Will Stihl chain fit Poulan?
Product Description. STIHL 63 PM3-56 chainsaw chain made in Switzerland with high quality steel. This chain fits Homelite, Poulan, Echo, Craftsman, Remington and others with the same specs.
What size chainsaw do I need for a 36 inch bar?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).