The most popular saws I see here are stihl 460 and husky 372xp. Those are probably 90% of the saws used by logging crews here. Quite a few of the firewood cutters, tree services and homeowners have them in these parts as well.
Going to the Stihl or Husqvarna website, they have their saws broken down into commercial vs. landowner or occasional use saws. The big tree guys from the Pacific North West typically have the plus 80cc pro saws and pull longer bars. The saw/bar combos of large saw long bar, are working day in and out for thousands of guys on the BC coast, and Wash and Ore coast as well.
The last question I asked him was, ‘what was your favorite chainsaw and what is the best logging chainsaw?’. Here are our top picks for the best logging chainsaw, but if you know anything about the chainsaw community, others will have a much different list. The Stihl 500i is generally seen as the ultimate logging chainsaw. There are many in the logging and chainsaw community who think that if you don’t have a Stihl, you don’t have a chainsaw. While we’ve mentioned another couple of chainsaw brands here, it’s safe to say the majority of loggers use Stihl saws, and the rest use Husqvarna. Reas Stihl even invented the chainsaw for logging purposes! Answering these questions should help you to decide what is the best logging chainsaw for you.
It is an obvious fact that professional and experienced loggers don’t just use any type of chainsaw to do their jobs. Professional loggers usually go for chainsaws with engine power ranging from 40cc and above, with a guide bar length of 14 inches and more. Some may prefer professional chainsaws with high torque and low maintenance, while others may prefer the ruggedness of the chainsaw instead. Nevertheless, the most crucial thing is that the chainsaw you choose does its job correctly and safely.
Professional, experienced loggers don’t just use any other type of chainsaw they come across to get the job done. There’s always a heated debate as to which is the best chainsaw brand for the loggers. Efficient kickback protection is necessary for any chainsaw for loggers.
what chainsaw do loggers prefer Related Question:
What brand chainsaw do most loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
What kind of saws do loggers use?
It is an obvious fact that professional and experienced loggers don’t just use any type of chainsaw to do their jobs. Instead, they specifically go for chainsaws with a high level of performance, high power, great durability, and productivity that suit the kind of large projects they work on.
What chainsaw does the Forest Service use?
The STIHL MS 461 chainsaw, often used by wildland firefighters, is one of four models being recalled. Today the Consumer Product Safety Commission (CPSC) announced a recall of 100,000 STIHL chainsaws that are at risk of fire and burn hazards.
What size bar do loggers use?
A 20″ bar is about standard in the woods here, not many trees you can’t cut with a 20″ and a bit of work. I have 20″ on my 70cc saws, 24″ on my 385xp. I do have a 395 with a 32″ I mill with.
What is the number one selling chainsaw?
Stihl 271 Farm Boss Chainsaw STIHL are still the number one selling chainsaw brand in the USA. The Stihl 271 Farm Boss is a great saw for the small farm owner, or if you have a larger section of land with mature trees, and you need a reliable saw that can handle big jobs on a regular basis.
What is most aggressive chainsaw chain?
404″ chainsaw pitch is the most aggressive chainsaw chain pitch for professional arborists.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chain stays sharp the longest?
Husqvarna Chainsaw Chain 16″ . The x-Cut line of Husqvarna chains is also designed to stay sharp longer, so you can cut for a longer amount of time before the chain needs sharpening.
What saws do lumberjacks use?
Re: what chainsaws do lumber jacks use? Generally the Pro grade Stihls, Husquvarna (XP series), Johnserred (pretty much same as Huskys) with a smattering of Dolmars, Oleo Macs and a couple of others. Pro Mac 610 is a 60cc saw, so something like a Stihl MS 362 or a Husky 357XP would be the current replacement.
Is McCulloch a good chainsaw?
Whether cutting firewood or felling large trees, all McCulloch chainsaws have strong engines, great ergonomics and superior durability. With a high chain speed, and a slimmed-down lightweight design McCulloch’s chainsaws are probably the smoothest chainsaws you’ve ever tried.
What is the lightest most powerful chainsaw?
Weighing only 5.7 pounds (without bar and chain), ECHO’s CS-2511P is the lightest gas-powered rear-handle chainsaw in the world with the most power in its class, states the company.
Can you use battery powered chainsaw in wilderness?
Powered rock drills and portable generators are permissible. Power saw use in the The National Parks use power saws in trail maintenance under the same Wilderness Act regulations as the Forest Service. Power saws were used to maintain most wilderness trails prior to wilderness designation.
What kind of chainsaws do firefighters use?
If the saw is going to be used for wildland fire, the brands most commonly used are Stihl or Husqvarna. The main reason for this is when you are out on a large fire the supply unit generally only carries parts for these two saws.
Do lumberjacks use chainsaws?
Many of the old job specialties on logging crews are now obsolete. Chainsaws, harvesters, and feller bunchers are now used to cut or fell trees. The tree is turned into logs by removing the limbs (delimbing) and cutting it into logs of optimal length (bucking).