While the saw is ideal for those purposes, you can also use it to make furniture-grade cuts in wood, cut steel or aluminum, reduce unwieldly sheets of plywood to more manageable sizes, and do heavy demolition cuts through lumber that has nails in it. These blades are rated for steel plate, pipe and conduit, and shapes such as L, U, and squares; some blades are also designed for cutting the same shapes in aluminum, and a few blades are even rated for making the cut in stainless steel, a notoriously difficult material to cut. Not all metal-cutting circular saw blades will cut thin sheet materials such a roofing and metal trim.
Cut Metal Fast There’s nothing wrong with using a good, old-fashioned hacksaw, but there are faster, easier ways to cut metal. Cut Aluminum with Your Miter Saw Making accurate cuts on aluminum rods, tubes and angles is easy with a miter saw and a blade designed to cut nonferrous metal. Cut Metal Lath and Mesh with a Grinder Metal lath and hardware cloth can be cut with a tin snips, but there’s an easier way.
what circular saw blade cuts metal Related Question:
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What type of circular saw blade do you need to cut metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
Can I use a wood blade to cut metal?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Can carbide blade cut metal?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
What is a 40 tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
What is a 24 tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
Can you use a circular saw to cut aluminum?
Most grades of aluminum offer excellent work ability and weldability, making them suitable for a wide range of applications. The preferred way to cut this material is with a miter saw but a circular saw still works.
What kind of saw blade do you use to cut aluminum?
For cutting aluminum, your best bet would be for a blade suited for non-ferrous materials. These blades typically have “TCG” triple chip grind tooth profiles, which work best on aluminum and plastic materials. Something like the Freud LU77M010 (more info, $62 via Amazon) is what I’d pick.
Can Diablo blade cut aluminum?
Diablo’s Aluminum saw blade series is ideal for corded and cordless saws when on-the-job cutting non-ferrous metals such as aluminum extrusions, copper pipe, brass plate, etc.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What does 18 TPI mean?
TPI explained TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable.
What is TPI for metal?
TPI is measured from gullet to gullet, not tooth tip to tooth tip – this is known as pitch. The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
What is a ferrous metal cutting blade?
Steel & Ferrous Metal Oshlun ferrous metal cutting saw blades employ C-6 carbide teeth and a triple chip grind to ensure a long cutting life in steel studs, angle iron, pipe, rebar, channel, flat stock, conduit, and much more. They can also be used for cutting non ferrous metals such as aluminum, copper, and brass.
