For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
While the saw is ideal for those purposes, you can also use it to make furniture-grade cuts in wood, cut steel or aluminum, reduce unwieldly sheets of plywood to more manageable sizes, and do heavy demolition cuts through lumber that has nails in it. These blades are rated for steel plate, pipe and conduit, and shapes such as L, U, and squares; some blades are also designed for cutting the same shapes in aluminum, and a few blades are even rated for making the cut in stainless steel, a notoriously difficult material to cut. Not all metal-cutting circular saw blades will cut thin sheet materials such a roofing and metal trim.
Be extremely careful when using a circular saw and wear proper eye, ear, and lung protection regardless of the blade that is installed. The better approach is to use a jig saw with a fine blade, or a table saw with an 80-tooth blade. Straight cuts with a circular saw and fine blade can work, especially if the panel and a straight edge guide board are clamped in place.
There are differences in the tooth designs of various blades, which does affect their functionality, but the primary consideration when buying a new saw blade is the number of teeth. Your primary concern when making these saw cuts is just getting the piece to the proper length and making it square, which is a function of the saw quality, not the blade. A 24-tooth blade is a good compromise for many cutting jobs, and it is the most common blade supplied with new circular saws.
what circular saw blade for decking Related Question:
What saw blade for decking?
Table saw blades with a 7 to 9 inch diameter and few teeth are best for cutting composite decking. Blades made specifically for cutting composite decking usually have a tooth design that makes them unique from the other ones. Miter Saw Blades: There are various types of miter saw blades.
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
What blade should I use to cut pressure treated wood?
General Purpose Wood Saw Blade. Diablo’s general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks.
What circular saw blade is best for cutting plywood and why?
Best Circular Saw Blade: Ultra Fine Finish With 60 teeth and a . 059-inch kerf, the Freud D0760X Diablo Circular Saw Blade creates clean, smooth cuts on delicate material like veneer plywood and melamine. This thin kerf greatly reduces the chance of chipping and blowouts, and doesn’t waste any material.
Do you need a special saw blade for composite decking?
Yes, you can cut most composite decking just like wood — no special tools required.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
How do you pick a circular saw blade?
Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
What circular saw blade is best for pressure treated wood?
The best circular saw blade for pressure-treated wood would include a thin kerf blade and alternate-top bevel carbide tips. The blade should also be made of a durable material that’ll prevent kickback.
Can you rip pressure treated wood?
You can rip it down if you want then coat the cut side with the green pressure treat stuff IF you have a Menards as Depot and Lowes don’t carry it.
What is a finishing saw blade used for?
Finishing Blades have a lot more teeth on them compared to framing Blades and are designed to make smoother cuts eliminating chips while cutting the wood and is best suited for finished type materials that will be visible.
What kind of saw blade is best for cutting plywood?
To get the best-quality cuts, invest in an 80-tooth blade designed for sheet goods. The small teeth take little bites to reduce chip-out and are steeply beveled at their edges to score the veneer face. You’ll have to slow your feed rate, but will get a much smoother edge.
What type of saw blade is best for cutting plywood?
For table and miter saws, invest in an 80 TPI plywood blade, one designed for cross (miter saw) or rip (table saw) cuts. Then when making your cuts, set yourself up for success. Your plywood should be oriented so that the blade exits the wood on the good face.
How do you cut a plywood with a circular saw without splintering?
To do so, place the best side (meaning the side of the door that will be most visible once it’s hung) face down. Then score along the edge of the cut line with a sharp utility knife. Now when you make the cut, the wood fibers will break off cleanly at the scored line, leaving a smooth, splinter-free cut.
Can you cut decking with a circular saw?
Decking Saw You can make use of a circular saw to cut your decking board. Circular saws are perfect for cutting deckings; they cut the decking smoothly.
