So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
If you want to know which blade to use for a specific project or are just looking for an overview of the types of blades that exist, here we have all the information you need about circular saw blade types. One of the most obvious features of any circular saw blade that will be immediately recognizable even to someone who has never used a circular saw in their life is the number of teeth. They are a good choice if you need one blade for a variety of uses, but if you need a blade for a more specific job, you’re better off buying a specialist blade for that application.
A circular saw blade is a special type of blade that works well with circular saws and is particularly designed to cut through different materials with ease. The circular saw blade is reinforced and strengthened to provide the smooth and optimum performance that you experience from your circular saw, and once the blade inside your saw becomes warped or worn out, you can replace it with a similar one to ensure that you keep getting clean and precise cuts every time you use it. Most of the other blades often get overheated and warped, but this isn’t something you experience with the circular saw blade.
The motor on the saw enables the blade to spin at high speeds, enabling the teeth to smoothly cut through materials. Blade Types:Generally speaking there are four major categories of circular saw blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain. Combination saw blades are designed to cut both rips and crosscuts and are the most common type of circular saw blades. Unless you have two circular saw blades available at all times, it would be more than a nuisance to switch from a rip to a crosscut blade every time you change the cutting direction. Crosscut saw blades are designed primarily to achieve a smooth, clean and safe cut when cutting perpendicular to the wood grain. Specialty blades include a variety of blades, such as dado and plywood, which deserve their rightful attention in another article.
what circular saw blade to cut wood Related Question:
What kind of blade Do I need to cut wood with circular saw?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
What blade is best for cutting wood?
Ripping solid wood: Use a 24-tooth to 30-tooth blade. You can use 40-tooth to 50-tooth multipurpose blade as well, but it will take longer. Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well.
What TPI is best for cutting wood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
What is a 40 tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
What is a 60 tooth saw blade used for?
Honorable Mention: 60t or 80t Cross Cutting Blade A good cross cutting blade is designed to provide ultra-smooth cuts going across the grain without splintering or burning. And ultra-smooth cuts equate to better precision and tighter joinery in your projects. Generally, more teeth equals a better cut.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
What is a 180 tooth saw blade used for?
Designed for cutting a variety of materials, including plywood, vinyl siding, and plastic, the CRAFTSMAN 10-in 180-tooth high-speed steel miter/table saw blade set is a must-have for your workshop.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
Can I use a circular saw to cut tree branches?
While its possible to use a circular saw to cut a tree branch I wouldn’t advise it. They’re not meant for trimming trees and because of that, I won’t be adding it to list. Same goes for the other saws designed for something other than cutting trees.
What saw is best for thick wood?
That’s why a circular saw is the first choice for cutting either steel, masonry, ceramic tile, or thick wood. Cutting thick wood might be a problem even for an experienced woodworker. In this case, a circular saw makes the cutting safe, easy, and accurate.
How thick of wood can you cut with a circular saw?
Generally, the blade of a circular saw can cut wood of thickness up to 2.5 inches. Depending on the thickness of the wood being cut, you need to change your blade’s depth. Since your wood is thick, ensure you are using Carbon-tipped blades. Use a crosscut blade for smoother cuts and rip blades for grain cuts.
What size blade does a Ryobi circular saw?
Blade Size: 6-1/2 in.
