Carbide tipped saw blades are recommended for superior cuts and longer life of the cutting edge. Cutting other materials on saw blades intended for acrylic will dull or damage the blade and lead to poor cutting performance when the blade is used again to cut acrylic. For cutting acrylic, the teeth of the saw blade should have the triple-chip design, where the cutting edge of every other tooth is beveled.

Aside from being mindful of the abovementioned factors to consider when choosing a saw blade for cutting Plexiglass, it will also help to know the most recommended circular saw blades by the experts for cutting Plexiglass. 2) Diablo D1080N. The Diablo D1080N is a saw blade rolled out by Diablo, a pioneering company in the manufacturing of circular saw blades. 5) Irwin 11820ZR. Another excellent option if you are looking for a circular saw blade for cutting Plexiglass is the Irwin 11820ZR. The Irwin 11820ZR is a 6-1/2″ circular saw blade that comes with 140 teeth.

How to Cut Acrylic Sheet Instructional VideoScribing Tool, Scroll Saw, Band Saw, Table SawHow to Cut and Fabricate Plexiglass sheet For all of the fabrication information, please download the complete brochure. Authorized Plexiglass Fabrication Brochure Download Also – a great article written by the makers of Plexiglas – Sawing Acrylic Sheet – as published in the IAPD Magazine Plexiglass acrylic sheet may be cut by sawing or routing with power equipment saws or by scribing and breaking. Circular blade saws are limited to straight cuts; scroll and sabre saws for rough cutting small-radius curves in thin Plexiglas® acrylic sheet; band saws for rough cutting larger-radius curves or for making rough straight cuts in thick Plexiglass acrylic sheet.

Amana’s triple-chip grind, carbide-tipped teeth produce less heat than a standard blade, leaving a crisp, smooth edge without “Chip-welding”. These industrial-quality blades work great on acrylic, Plexiglas®, polycarbonate, Lexan®, and many other sheet plastics. To prevent dulling, use blade only for cutting plastics.

what circular saw blade to use for acrylic Related Question:

Can I use a circular saw to cut acrylic?

Circular saws can be used on acrylic sheets of all thicknesses. Use jigsaws with metal cutting blades of reduced depth and sharp teeth (5-6 teeth per cm) – use the finest blade you can. Be sure to allow the blade to stop before withdrawing from the cut.

What blade should I use to cut acrylic?

Carbide tipped saw blades are recommended for superior cuts and longer life of the cutting edge. It is also important to dedicate saw blades for cutting acrylic only.

What circular saw blade is best for cutting plexiglass?

For best results with Plexiglas® MC acrylic sheet, circular saw blades should be the largest diameter possible and contain 60 carbide-tipped teeth with a triple-chip-tooth design. Teeth should be shaped with a 5° to 10° positive rake angle and have sharp cutting edges with adequate clearance.

Can you use circular saw for plexiglass?

When using a saw: Fit a circular saw or table saw with a fine blade with crosscut teeth to prevent chipping the piece during the cut. Line the plexiglass sheet along the cut line. Use the saw at a slower speed, or keep the material cool by spraying water over the cut point during the saw operation.

What’s the best way to cut acrylic?

While the recommended way to cut acrylic is with a high-quality table saw, the simplest and most beginner-friendly way to cut plexiglass is by using a scoring tool. However, keep in mind that you should only use this method on acrylic sheets that are 1/4 of an inch thick or thinner.

How do you cut plastic with a circular saw?

Mark the line you are cutting along with a permanent or grease marker. Secure the plastic safely to the work surface with a clamp. Use the circular saw (or table saw) to cut through the plastic in the same way you’d cut through wood.

How many teeth do you need to cut acrylic?

So we recommend 10″, 80 tooth, carbide tip, UNICHIP grind. The grind is very important as it makes for a smoother cut. Never use your acrylic blade for cutting wood or any other material.

Is acrylic the same as plexiglass?

Plexiglass with two s’s is the generic term synonymous with acrylic sheet. Plexiglas® with one s is the brand name. Other trade names that have become comparable to Plexiglas® include Acrylite®, Lucite®, and Perspex®.

How do you cut an acrylic sheet in a round shape?

What is the best way to cut a circle in plexiglass? First, clamp your plexiglass sheet onto the workbench. Mark your circle on the protective covering. Cut along the marks using a blade or drill your way through the circumference of the circle using a jigsaw or a hole saw.

Can you cut acrylic with a multi tool?

This blade is also commonly used for cutting wood, fiberglass, metals, thin sheet metal, drywall, and of course, Plexiglass. Suppose you have an oscillating multi-tool. In that case, you can easily cut Plexiglass, especially if you have a fragile piece of Plexiglass.

Is acrylic easy to cut?

Acrylic sheets are easy to cut if you know what tools to use! I’ll show you how to cut acrylic or Plexiglass three different ways for the best results! Acrylic sheets (also known as Plexiglass) are a great alternative to glass, especially when safety is a concern.

How do you cut thin plastic without cracking it?

You can easily cut thin plastic sheets less than 1/16 inch (. 063) thick with a utility knife. Harder clear plastics such as polycarbonate may require multiple passes with a knife, but the result will be a clean cut finished edge with no chips or cracks.

How do you cut plastic cleanly?

You can use a hacksaw, fine-toothed saw, circular saw, or jigsaw to cut plastic. If you use a hacksaw or circular saw, you’ll also need a plastic cutting blade. Avoid using saws or blades with large teeth because they will chip or break the plastic and create rough edges.

Will a saw cut through plastic?

While all saws will be able to cut through plastic, saws with large teeth will leave the plastic torn or shredded. Some of these fine-toothed saws look like a knife or straight-razor and can easily be used with one hand.

Leave a Reply

Your email address will not be published. Required fields are marked *